Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock 1/4 inch overlay hinge describes a semi-concealed face frame hinge that controls how the cabinet door overlays the frame by 1/4 inch, giving installers a clear reference for planning reveal lines on face-frame cabinets. The hinge is described as partial wrap, so it wraps around part of the cabinet frame edge, adding bearing surface where the hinge meets the frame for stable door support. The hinge is self-close, so the spring action draws the door shut near the end of travel, which helps doors stay closed without separate catches. The satin nickel finish defines the visible surface appearance, which matters when matching hinges to pulls and other visible hardware in the same project. The hinge is made from steel, so the main body uses a metal construction that supports normal cabinet door duty in residential and light commercial installations.
The hinge is described as screw-on, so the mounting method uses screws driven through the hinge into the cabinet frame and door, providing a straightforward mechanical attachment method familiar to installers. The specified screw size is #6 x 5/8 inch, so the mounting holes are sized for that diameter and length, which helps installers choose compatible screws for driving into typical cabinet materials. The hinge width is listed as 1-1/2 inches, giving a frame coverage dimension that helps with layout when hinges are close to face-frame edges or adjacent components. The projection is specified as 5/8 inch, so the hinge projects this distance, which informs door clearance planning relative to adjacent doors, walls, or trim.
This hinge is categorized under Semi-Concealed Face Frame Hinges, so it is intended for face-frame cabinet construction where the door overlays the front frame rather than a frameless side panel. The 1/4 inch overlay value directly affects how much of the frame edge remains visible around the door, which helps installers set consistent reveals between neighboring doors and drawer fronts in a bank of cabinets. Because the overlay is specified rather than approximate, it gives a predictable starting point when laying out hinge cup locations and frame positions on new cabinet builds. On replacement jobs, the same 1/4 inch overlay designation helps match the existing door coverage on face frames that were originally built around a quarter-inch overlay configuration. When doors are sized to work with a 1/4 inch overlay hinge, using this hinge style supports maintaining the intended visual proportions of rails and stiles.
The hinge is made from steel, so its leaves and knuckles use a metal construction that can handle repeated door cycles typically found in everyday cabinet use. The satin nickel finish is applied to the hinge surfaces, defining a subdued, brushed metallic appearance that coordinates with satin nickel pulls and knobs used on cabinet doors and drawers. Because this hinge is semi-concealed, the visible portions in satin nickel become part of the door edge detail, which matters in kitchens, baths, or built-ins where hardware finish is part of the design. The hinge is described as self-close, so internal spring action engages as the door nears the closed position, drawing the door against the frame without relying solely on user force. This self-close behavior helps doors rest in a closed position against the frame, which is useful on cabinets that are opened and closed frequently during daily use. The 5/8 inch projection value in the description defines how far the hinge extends, which contributes to the door position relative to the frame edge and nearby components when the door is installed on typical face-frame cabinets.
The Amerock BPR7566G10 hinge is categorized as a semi-concealed face frame hinge, so it is intended for use on face-frame cabinet constructions.
The hinge has a 1/4 inch overlay, so the mounted door will cover the face frame by approximately one quarter inch along the hinge edge.
The hinge is described as screw-on and uses #6 x 5/8 inch screws, so it mounts by driving those screws through the hinge leaves into the door and frame.
The hinge is made from steel with a satin nickel finish, so it provides a metal hinge body with a satin nickel appearance on visible areas.
The hinge is self-close, so its internal spring action pulls the door shut near the end of travel, helping the door rest against the face frame when closed.
The hinge has a 5/8 inch projection, describing how far it extends from its mounting surfaces, which relates to door position and nearby clearances.
The Amerock 1/4 inch overlay hinge combines a defined 1/4 inch overlay with a semi-concealed face frame design, so it supports consistent door coverage on face-frame cabinets. Its partial wrap steel construction and satin nickel finish align with typical cabinet projects that call for semi-concealed hardware. The screw-on mounting style with #6 x 5/8 inch screws offers a familiar installation approach for both new work and replacements using the same overlay. For projects specifying Amerock BPR7566G10 or matching satin nickel semi-concealed hinges, this hinge provides the stated overlay, material, and finish combination.
Sold In: 1 Pair