Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Senco 23 gauge micro pin gives you a fine fastener for delicate wood applications where a small hole helps the finished job. The 23 gauge x 5/8 inch length pairs a very thin shank with a short reach, which suits light stock and trim without overwhelming the material. The pin head nail design provides a fastening point while staying visually minimal in finished cabinet doors or frames. The CZ10EAA identification ties this specific size and type to compatible Senco tools on the job. A count of 10,000 pins per box supports extended production runs or multiple jobs using the same fastener size. Sold in full box quantities only aligns ordering with shop needs when running cabinet doors, light trim, carvings, ornamentals, and picture frames at scale.
The Senco 23 gauge x 5/8 inch micro pin is specified for use in tools that accept this fastener size, which focuses setup around a known gauge and length. It fits Senco Finish Pro 10 tools, so existing Senco users can load these CZ10EAA pins directly into that platform. It also fits Senco SHP10, allowing another Senco option on the same pin size for different crew preferences. Compatibility with Porter Cable PIN100 means shops running that dedicated pin nailer can work this 5/8 inch micro pin into their existing workflow. Fit with the Fasco F1B A64-12/18 and similar models adds more tool choices around the same fastener, which helps standardize on one 23 gauge length across different brands.
The Senco 23 gauge x 5/8 inch micro pin targets cabinet doors where small face holes matter, so finished panels and rails show minimal fastener evidence after finishing. In light trim work, this size supports holding narrow profiles in place while keeping the fastener discreet along edges and reveals. For carvings and ornamentals, the fine 23 gauge shank penetrates detail pieces with less risk of splitting compared to larger fasteners. Picture frames benefit from the short 5/8 inch length and pin head, which secure miters and applied moldings without drawing attention away from the frame profile or the artwork.
The CZ10EAA designation locks the 23 gauge and 5/8 inch dimensions to a specific Senco product, which helps maintain consistent fastening performance across repeated jobs. Matching this part number to Senco Finish Pro 10 and SHP10 tools reduces setup variation, since those tools are designed to drive this micro pin size correctly. Compatibility with Porter Cable PIN100 and Fasco F1B A64-12/18 allows mixed-tool shops to run one fastener across multiple guns, which simplifies inventory and reduces wrong-size loading. The pin head nail configuration gives just enough head to grip cabinet doors, light trim, carvings, ornamentals, and picture frames, which supports stable assemblies while glues cure and parts move through sanding or finishing.
The Senco 23 gauge micro pin is specified for cabinet doors, light trim, carvings and ornamentals, and picture frames, which focuses it on finer woodworking and detail fastening.
The CZ10EAA pins are 5/8 inch long, which suits thinner stock in cabinet doors, trim, carvings, ornamentals, and picture frames where a short fastener is appropriate.
The Senco micro pins fit Senco Finish Pro 10, SHP10, Porter Cable PIN100, Fasco F1B A64-12/18, and similar models, so they work in multiple 23 gauge pin tools.
These 23 gauge pins are classified as pin head nails, which provide a defined holding point while remaining visually small on finished wood surfaces.
CZ10EAA is the Senco manufacturer part number that identifies this specific 23 gauge, 5/8 inch micro pin, which supports accurate reordering and tool matching.
The Senco 23 gauge x 5/8 inch micro pin CZ10EAA is supplied in 10,000 per box quantities, supporting extended production use. Sold in full box quantities only.
The Senco 23 gauge x 5/8 inch micro pin CZ10EAA pairs a fine 23 gauge shank with a short length for cabinet doors, light trim, carvings, ornamentals, and picture frames. Fit to Senco Finish Pro 10, SHP10, Porter Cable PIN100, and Fasco F1B A64-12/18 streamlines fastening across common 23 gauge tools. A 10,000 count per box, sold in full box quantities only, supports shops running repeated work on this specific fastener size.
Sold In: 1 Box