Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Epoch Edge knob in Verona Bronze is a decorative cabinet knob that combines a defined edge style with practical handling for doors and drawers. The knob belongs to the Century Edge collection, so it follows a coordinated design language when matching other Berenson pieces on a project. The solid brass material gives the knob a dense feel in the hand, which supports precise pulling on heavier cabinet fronts. With a length or diameter of 1-3/8 inches, the knob presents a substantial grip area that suits regular use on frequently opened cabinets. The 1-1/8 inch width keeps the knob compact across the face of the door, which helps when spacing multiple knobs on narrow rails or drawer fronts. A projection of 1-1/4 inches pulls the hand slightly away from the cabinet face, which helps reduce knuckle contact against the surface during operation.
This Berenson Epoch Edge knob uses screw mounting through the cabinet front, which aligns with standard drilled knob holes found on most cabinet doors and drawer fronts. The screw size is 8-32, so it matches common cabinet knob threading for straightforward transitions from existing hardware. A screw length of 1 inch is specified, which suits typical 3/4 inch door or drawer front thickness where the threaded connection needs reliable engagement without excessive protrusion. The 1-3/8 inch knob dimension provides a defined center point for drilling layouts, which assists when laying out multiple knobs in straight lines on a run of cabinetry. With a 1-1/8 inch width and 1-1/4 inch projection working together, the knob stays clear of adjacent edges while still projecting enough for a full finger pull on overlay or inset installations.
This Berenson Epoch Edge Series Verona Bronze knob fits cabinet and furniture applications where a decorative yet compact pull point is needed on doors or drawers. The decorative hardware and moldings category alignment points this knob toward finished woodworking projects rather than rough utility cabinetry. Solid brass material gives the knob weight suited to kitchen, bath, and built-in cabinetry where hardware is handled frequently. The Century Edge collection connection means the knob can be used anywhere a coordinated Century Edge look is desired across multiple pieces, such as matching doors, drawers, and small access panels. With a 1-3/8 inch main dimension, the knob suits both single-door cabinets and narrower drawer fronts where a pull should stay centered without dominating the panel. The Verona Bronze finish supports use in design schemes that call for darker, warm-toned metal hardware on stained or painted wood surfaces.
The 1-3/8 inch length or diameter provides a clear reference when spacing knobs across a bank of drawers, which helps installers maintain visual alignment by measuring from knob edge to knob edge. A 1-1/8 inch width minimizes the risk of knobs crowding each other on smaller fronts, which supports cleaner sightlines and helps avoid interference when doors swing past adjacent pieces. The 1-1/4 inch projection sets a fixed standoff from the cabinet face, which simplifies planning around door profiles, applied moldings, or trim that might sit proud of the panel. The specified screw size of 8-32 standardizes the threaded interface, which is helpful when matching drilling and tapping practices already in use on a job. A 1 inch screw length suits many common cabinet front thicknesses, which reduces overhang at the back of the panel and supports a snug clamp of the solid brass knob against the surface.
The Berenson Epoch Edge knob is made from solid brass, which gives it a dense feel and supports a secure pull on doors and drawers under regular use.
The Epoch Edge knob has a 1-3/8 inch length or diameter, a 1-1/8 inch width, and a 1-1/4 inch projection, which together define its footprint and hand clearance on cabinet fronts.
The 1-1/4 inch projection holds the knob away from the door surface, which allows fingers to wrap behind the knob and reduces contact with the cabinet face during pulling.
The Berenson 1201-10VB-P knob uses an 8-32 screw size at 1 inch length, which matches common cabinet knob threading and suits typical cabinet front thicknesses.
The Century Edge collection designation means this knob follows a coordinated design family, which helps when selecting matching hardware pieces across a project.
The Verona Bronze finish sets the visible color and tone, which allows the knob to align with other Verona Bronze or similarly toned hardware in a room.
The Berenson Epoch Edge Series Verona Bronze 1-3/8 inch knob brings solid brass construction, Century Edge collection styling, and defined dimensions that support predictable layout work on doors and drawers. The combination of 1-3/8 inch main dimension, 1-1/8 inch width, and 1-1/4 inch projection gives a clear basis for drilling, spacing, and hand clearance planning across a run of cabinetry. With 8-32 screw threading at 1 inch length specified, the knob aligns with common cabinet hardware practices. For projects calling for Verona Bronze decorative hardware within the Century Edge family, this 1201-10VB-P knob offers a focused option built around known sizes and a consistent finish.
Sold In: 1 Each
