Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Epoch Edge pull gives you a 3-3/4 inch center to center grip that lays out cleanly across standard cabinet door and drawer drilling, so layouts stay consistent and hardware lines up straight from piece to piece. The solid brass material creates a sturdy feel in the hand and resists everyday handling, supporting long-term use on frequently opened fronts. Its Verona Bronze finish provides a dark, controlled tone that coordinates with warm woodwork and helps hardware read as a deliberate design choice on the job. Overall length of 4-7/16 inches means the pull spans slightly beyond the mounting holes, which keeps fingers clear of the door edge during use. A 1-3/16 inch projection stands the pull off the face enough for a comfortable grasp while still keeping profiles tight in narrower walkways. The 5/8 inch width offers a slim look that suits modern and traditional cabinet runs.
The 3-3/4 inch center to center dimension matches common cabinet drilling, so mounting holes can be laid out or re-used without unusual measurements. With overall length at 4-7/16 inches, the pull sits balanced around the hole centers, which helps maintain consistent margins at door and drawer edges when repeated across a run. The 1-3/16 inch projection provides a gap between the pull and cabinet face that allows fingers to wrap comfortably, improving grip when fronts are flush inset or close to adjacent panels. A 5/8 inch width keeps the footprint narrow, which is helpful on slimmer rails or smaller drawer fronts where wider pulls might crowd panel details. As part of the Century Edge collection from Berenson, this pull coordinates with other pieces in the same series, supporting unified hardware selection across a project.
This Berenson Epoch Edge pull with 3-3/4 inch center to center spacing fits well on cabinet doors and drawers drilled to that common pattern, so it works across many kitchen, bath, or built-in layouts using that dimension. The 4-7/16 inch total length keeps the pull visually proportional on standard drawer fronts, which helps hardware appear scaled correctly rather than oversized or undersized. A 5/8 inch width allows the pull to sit comfortably on narrow rails or stile edges, preserving door proportions while still providing a usable handhold. With projection at 1-3/16 inches, this pull functions on cabinets positioned near walls or appliances, because the hardware does not extend excessively into walkways. The Verona Bronze finish supports use on projects calling for a dark, warm-toned metal, tying together wood finishes and other bronze elements across a room.
The 3-3/4 inch center to center measurement lets installers repeat drilling patterns across multiple fronts, which supports faster production and accurate alignment when setting rows of doors or stacked drawers. Because the pull length is fixed at 4-7/16 inches, visual spacing at each installation can be planned in advance, helping maintain even reveals from edge to edge along a cabinet run. Solid brass material offers consistent weight and rigidity from piece to piece, so doors and drawers feel uniform in operation throughout a project. The 1-3/16 inch projection provides a predictable stand-off that keeps fingers away from finished faces, which can reduce smudging at pulls on lighter-colored fronts. At 5/8 inch width, the pull occupies a controlled footprint, giving designers and installers confidence that it will sit cleanly on both smaller vanity drawers and wider kitchen drawers with the same look.
The Berenson Epoch Edge pull has a 3-3/4 inch center to center measurement, so mounting holes are spaced to match a widely used cabinet boring pattern.
The pull length is 4-7/16 inches, which gives slight overhang past the mounting points for better finger clearance and balanced appearance on doors and drawers.
The Epoch Edge pull is made from solid brass, providing a dense feel and supporting repeated opening and closing on busy cabinet installations.
The pull projects 1-3/16 inches from the cabinet face, creating a useful gap for gripping while limiting how far hardware extends into adjacent space.
The 1207-10VB-P pull has a Verona Bronze finish, offering a dark, warm tone that coordinates with many stained woods and bronze fixtures.
The pull has a 5/8 inch width, giving a slim front profile that suits narrower rails and smaller drawer fronts without overwhelming the panel.
The Berenson Epoch Edge pull with 3-3/4 inch center to center spacing, 4-7/16 inch length, and 1-3/16 inch projection offers a predictable fit on many cabinet doors and drawers. Solid brass construction and Verona Bronze finish provide a coordinated look that supports both functional grip and visual consistency. For projects laid out around this common drilling pattern and footprint, this pull delivers a straightforward way to carry the same hardware across kitchens, baths, or built-ins.
Sold In: 1 Each
