
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Dynapro 3D left front locking device gives drawer installers front adjustment and locking tailored to Grass America Dynapro applications, so drawer fronts can be aligned accurately in demanding cabinetry work. This left front locking device provides 2D or 3D adjustment for drawers, allowing correction in height, side, and depth based on the chosen version, which helps dial in consistent reveals across a run of cabinets. It works for standard width or inset drawers, so the same part can support different design styles across a project. A minimum inside drawer width of 5-7/8 inches, or 150 mm, defines where this clip fits, helping plan drawer box sizing ahead of installation. Lightweight, high strength material keeps the component easy to handle during assembly while supporting the locking function at the front of the slide.
This Grass America Dynapro 3D left front locking device is designed around practical installation and adjustment needs at the drawer front. Pre-drilling recommended 3/32 inch, or 2.5 mm, gives a clear drill size for preparing the drawer box, supporting cleaner holes and more accurate placement. The depth adjustment range of plus 3.0 mm forward adjustment, available on the 3D version, allows the drawer front to move slightly outward relative to the cabinet, helping align it with doors or nearby components. Height adjustment range of plus 3.5 mm and side adjustment range of plus or minus 1.5 mm concentrate control where it is most visible, at the front, so installers can correct minor construction variances without rebuilding parts. This left front locking device works with standard width or inset drawers, letting one adjustment scheme support different face treatments.
This Dynapro 3D left front locking device suits drawers where precise front alignment is important, especially in cabinetry using Grass America Dynapro systems. It works for standard width or inset drawers, so it supports both overlay and inset design approaches within the same installation. The minimum inside drawer width of 5-7/8 inches, or 150 mm, means it fits drawers at or above that internal size, which helps align it with common kitchen, bath, and furniture drawer dimensions. Lightweight, high strength material keeps handling straightforward when installing multiple drawers, which matters when adjusting several fronts in sequence. The left front orientation defines its role on the drawer, so it functions as the locking and adjustment point on that side.
This Dynapro 3D left front locking device provides 2D or 3D adjustment for drawers, so one component controls height, side, and, in the 3D version, depth. Height adjustment range of plus 3.5 mm lets installers shift fronts upward slightly to line up top edges across stacked drawers. Side adjustment range of plus or minus 1.5 mm offers small left-right changes, helping center the front in the opening and balance gaps next to adjacent fronts. Depth adjustment range of plus 3.0 mm forward adjustment on the 3D version shifts the drawer front outward relative to the cabinet, which helps bring it flush with neighboring doors or panels. Pre-drilling recommended 3/32 inch, or 2.5 mm, supports consistent mounting hole size, which contributes to repeatable placement across multiple drawers using the same Grass America Dynapro setup.
The Dynapro 3D left front locking device provides 2D or 3D adjustment for drawers, giving height, side, and, on the 3D version, depth control to refine drawer front alignment.
The Dynapro 3D left front locking device offers a height adjustment range of plus 3.5 mm and a side adjustment range of plus or minus 1.5 mm, supporting fine tuning of drawer front position.
The Dynapro 3D left front locking device, in the 3D version, provides a depth adjustment range of plus 3.0 mm forward adjustment, helping set the drawer front projection.
The Dynapro 3D left front locking device is specified for drawers with a minimum inside drawer width of 5-7/8 inches, or 150 mm, aligning with common cabinet drawer dimensions.
The Dynapro 3D left front locking device is designed for standard width or inset drawers, so it supports both styles within Grass America Dynapro installations.
The Dynapro 3D left front locking device lists pre-drilling recommended 3/32 inch, or 2.5 mm, guiding hole preparation in the drawer box.
The Dynapro 3D left front locking device from Grass America ties adjustment, locking, and drawer size criteria into one defined part, supporting predictable results on Dynapro-based drawers. With specified minimum inside drawer width, height, side, and depth adjustment ranges, it offers clear parameters for designing and installing standard width or inset drawers. Lightweight, high strength material and pre-drilling recommended 3/32 inch, or 2.5 mm, help streamline repetitive installation steps. For projects where consistent drawer front reveals, projection, and side gaps matter, this left front locking device provides a focused way to control those details at the drawer front.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | GFF134108948233 Mfr# F134108948233 | Dynapro 3D Right Front Locking Device No Flange |