Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Blum CLIP top hinge hangs inset doors on frameless and face-frame cabinets with BLUMOTION soft-close and INSERTA tool-free mounting, finished in Onyx for installations where the hardware color is part of the design.
An inset door lives inside the cabinet opening rather than over it, which means the fit is tight and the reveal matters on every edge. This hinge carries the full crank inset geometry that positions the door correctly within the frame. The 35mm cup bores into the back of the door, and the arm clips to a Blum base plate mounted to the cabinet side, ordered separately. INSERTA brings the plate to the cabinet by pressing into the pre-drilled 5mm system holes, skipping the plate-screw step entirely. On frameless boxes and face-frame cabinets alike, that makes a clean install faster to execute. The 95 degree swing is the designed opening for this application, giving inset doors the arc they need to clear the cabinet face without over-traveling.
The hinge body is steel with an Onyx finish. Onyx is Blum's dark matte color, distinct from standard nickel and from plain black hardware. On glass-door cabinets, open shelving, or furniture pieces where the hinge arm stays visible, the finish reads as intentional rather than incidental. BLUMOTION is integrated into the hinge, not added on, which keeps the profile clean and means there is nothing to clip, adjust, or replace separately on the damping side. Three-way adjustment handles height, side, and depth after the door is hung, so the reveal stays even as the cabinet settles over time.
This is the hinge for inset work where the Onyx finish needs to hold up alongside other dark hardware in the space. It suits cabinet shops and installers specifying frameless or face-frame boxes with flush inset fronts, and designers calling out a consistent dark hardware palette across pulls, knobs, and hinges. INSERTA requires 5mm pre-drilled system holes in the cabinet side; without them, the screw-on plate version is the correct choice. For doors thicker than 22mm, a thick-door hinge is the right fit. For the same inset application in Nickel or standard Black, sibling variants in this series carry the same specs in those finishes.
No. The base plate mounts to the cabinet and is sold separately. Use a Blum plate matched to your cabinet construction. Plates from other brands will not connect to this hinge.
The 95 degree swing is the correct geometry for inset doors. It gives the door the arc it needs to clear the cabinet face without over-traveling. It is a design spec, not a limitation.
INSERTA is how the plate attaches to the cabinet. Pre-mounted system screws press into 5mm pre-drilled holes in the cabinet side, so no plate screws are needed. The hinge arm then clips onto the plate without tools. Both connections are tool-free, but they are two separate steps.
Onyx is Blum's finish name for this dark color variant. It is not interchangeable with other brands' black finishes, and Onyx accessories are specific to the Onyx line within Blum's range.
When the design calls for inset doors, a quiet close, and hardware that holds its color alongside the rest of the pull and knob palette, this hinge covers all three.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  BP175H3100-ONYX Mfr# 175H3100-ONYX | CLIP Cam Adjustable In-Line Mounting Plate, Onyx Black, Screw-On, 0mm | ||||
Sold in: 1 Each |  BP174H7100E-ONYX Mfr# 174H7100E-ONYX | CLIP Cam Adjustable Wing Mounting Plate, Onyx Black, Expando, 0mm | ||||
Sold in: 1 Each |  BP70T3504-ONYX Mfr# 70T3504-ONYX | CLIP top 71B 110˚ Hinge Cup Cover Cap, Onyx Black |
