Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Würth #8 x 1-1/4" flat head assembly screw is built for high-volume cabinet and casework production where consistent countersinking and reliable holding power in 3/4-inch stock keep the line moving. A coarse thread, Type 17 Auger point, and milling nibs work together to drive cleanly and seat flush — job after job.
Cabinet carcass and face-frame work almost always starts with 3/4-inch material, and 1-1/4" is the length that threads fully into the receiving panel without breaking through the back face. It is long enough to develop strong holding power in plywood and engineered panels, short enough to stay well within the panel on standard cabinet construction. Shops running melamine, MDF, or plywood box construction will reach for this length repeatedly throughout a typical build cycle.
The Type 17 Auger point features an extended flute that removes wood fibers ahead of the thread, cutting torque demand and protecting material against splitting — especially near panel edges where tight tolerances are the norm. The milling nibs on the underside of the flat head mill a clean countersink as the screw drives home, leaving a flush, finished surface in hardwoods, softwoods, laminates, and MDF without a separate countersink step. The #2 Phillips drive accepts standard bits, keeping setups simple on busy lines.
At 5000 per pail, this screw is intended for shops and crews that measure consumption in thousands, not hundreds. Cabinet manufacturers, casework fabricators, and finish carpenters installing pre-built cabinets on site will find the pail format practical — it moves from the bench to the floor to the truck without the bulk or fragility of a box. The black finish reads as finished hardware against dark cabinet interiors, reducing visual distraction in open-shelf or glass-door applications. This screw is sized and threaded for interior panel goods; outdoor or treated-lumber applications call for a corrosion-rated fastener.
Yes. This length is the standard for pocket-hole joints in 3/4-inch panels. The coarse thread and washer-flat head seat well in the pocket and pull the joint tight without over-penetrating the receiving member.
Yes. The auger flute clears material ahead of the thread in engineered panels, reducing the tendency to push material outward and cause face delamination near the screw entry point.
In most softwoods, plywood, MDF, and laminate panel goods, the milling nibs cut a clean enough countersink that a separate step is not needed. In very hard or dense hardwoods, a pilot countersink may still improve head seating.
No. The black finish on this screw is for interior work. Use a corrosion-rated fastener for exterior, wet-area, or ACQ pressure-treated lumber applications.
The pail is more durable and easier to carry than a cardboard box, making it practical to move between workstations or load into a vehicle for site installations without worrying about the package failing mid-job.
When 3/4-inch cabinet stock is the constant across a production run, the 1-1/4" Würth assembly screw removes variables — clean entry, flush seating, consistent drive — so crews can focus on building rather than adjusting.
Sold In: 5000 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 10 Each |  WW614176461 Mfr# 0614176461005 10 | #2 x 1" Phillips Drive Insert Bit (10/Bag) |