Würth #8 x 2" Flat Head Assembly Screw Phillips Drive - Type 17 Auger Point Coarse Thread Black, 3670000078961 3000 - 3000/Box

#8 x 2 Inch Flat Head Assembly Screw Use

#8 x 2 inch flat head assembly screw from Wurth gives a defined size and head style that suits assembly work where a flat seating surface is needed, so components draw up tight without a raised head interfering with adjacent parts or hardware. The coarse thread described in the product data works with materials that benefit from deeper thread bite, helping the screw grip firmly as it is driven. The black finish listed in the name provides a dark appearance that can visually blend with darker materials or hardware layouts. The Type 17 auger point noted in the description is designed to start more easily in many wood applications, helping the screw begin cutting into the material with less initial resistance during driving. The Phillips drive stated in the data is a familiar interface that fits #2 Phillips drive bits, so installers can use common driver bits during assembly.

Key Details That Support Assembly Work

• The #8 diameter and 2 inch length stated in the product name define how deep the screw can reach into joined materials, which helps installers select it for assemblies where that penetration depth is appropriate.
• The flat head design identified in the name lets the head seat flush in a matching countersink, so work surfaces remain smooth where a flat finish around the fastener is important.
• The coarse thread described in the product information engages more material per turn, which supports holding power in many wood-based assemblies while limiting the time spent driving each fastener.
• The Type 17 auger point referenced in the description is shaped to start into wood more readily, which can reduce splitting risk in many assemblies and allow faster progress during repetitive driving.
• The black finish called out in the name provides a darker appearance at the fastener locations, which helps it visually coordinate with dark trim, panels, or hardware layouts in finished work.
• The case hardened reference in the web description indicates that the screw has been hardened, which supports resistance to head damage under drive torque so installers can keep a steadier workflow.

Installation Details For Phillips Drive Use

The product description notes that these screws use #2 Phillips drive bits, so drivers and bits sized for #2 Phillips can be used for installation across typical assembly tasks. The case hardened detail in the description means the screw body and head are treated for hardness, which supports the screw under driving torque when power drivers are used in production or jobsite conditions. The information that 3/4 inch and 1 inch lengths are threaded fully, while other sizes are threaded two-thirds from the bottom, explains how thread coverage changes with screw length within this series. That threading pattern lets installers choose lengths in this family knowing where threads will be located relative to joined parts, which is useful when deciding how the screw should grip the base material.

Assembly Screw Performance In Woodworking Tasks

Where This Wurth Assembly Screw Fits Best

The category listing as Screws and the description as a flat head assembly screw position this product for fastening tasks in woodworking and related assembly where a controlled head profile is important. The coarse thread notation supports use in many wood or composite applications where threads need to bite efficiently into the base material during installation. The Type 17 auger point reference shows that the tip is shaped to help the screw cut into the material, which is useful in repetitive fastening where each screw needs to start quickly without extensive predrilling. The black finish stated in the product name means the visible parts of the fastener present a dark look, which can coordinate with dark casework or fixtures so the fastener appearance aligns with the overall design of the installation.

Details That Support Consistent Assembly Results

The web description explains that 3/4 inch and 1 inch lengths in this screw family are threaded fully, while the other lengths carry threads two-thirds from the bottom, which affects how the screw clamps materials together by locating the unthreaded shank where needed. Knowing that the screws use #2 Phillips drive bits lets installers match bits and drivers confidently so drive engagement remains consistent across production runs. The note that the screws are case hardened indicates that the metal has been hardened, which supports resistance to wear and deformation during driving when many fasteners are driven in sequence. The manufacturer part number 3670000078961 3000 is specified in the data, which helps buyers and installers reorder the exact same screw for future work so assemblies can remain consistent across multiple projects.

Common Questions About This Assembly Screw

Selecting This Screw For Your Next Assembly Job

This Wurth #8 x 2 inch flat head assembly screw with coarse thread, Type 17 auger point, and black finish provides defined dimensions and characteristics for woodworking and assembly projects. The use of #2 Phillips drive bits and case hardened construction supports consistent driving with common powered tools in shop or field conditions. The detailed description of threading patterns and the specific manufacturer part number 3670000078961 3000 help buyers align this screw with recurring assemblies and future orders when a matching fastener is needed.