Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Würth #8 x 1" flat head assembly screw is a production-ready fastener for cabinet shop and woodworking applications where a short, controlled screw is the right tool. Coarse thread, a Type 17 auger point, underhead nibs, and a #2 square drive combine to handle the fastening tasks where the material is thin or the margin for over-penetration is small.
A 1-inch screw fills a specific role that longer screws cannot: fastening into thin or layered material without the risk of punching through the back face. Drawer box sides, cabinet back panels, hardware mounting strips, and face-applied trim pieces are all applications where staying short is the point. This screw is also a natural fit for attaching thin panels to a substrate or for any joint where the combined stock depth is close to 3/4 inch and a 1-1/4 inch screw would be marginal. Pail packaging is convenient for movement around the shop or to the job site.
The black finish suits interior cabinet interiors and shop assembly where a neutral, low-visibility head is preferred against dark-stained or painted surfaces. Coarse thread is the right call for the materials cabinet shops use most: plywood, MDF, melamine-faced particleboard, and softwood. The Type 17 auger point starts cleanly without pre-drilling in most of these substrates, and the underhead nibs relieve material as the flat head seats, producing a flush countersink in a single pass. This is an indoor screw for dry cabinet and woodworking applications.
Cabinet shops running high-volume production need a short assembly screw that drives consistently and does not require a separate countersink step on every hole. This 1-inch #8 square drive screw covers that ground, from hardware backer installation to drawer box assembly to back panel attachment. The 7000-piece pail supports shops that go through fasteners quickly and want a stable, moveable supply at the bench or station rather than a fixed shelf location.
For face-nailing or screwing through a thin back panel into a 3/4-inch side, a 1-inch screw typically provides good engagement without risk of breaking through the exterior face. Check your material thickness and joint depth before committing to a run.
The Type 17 point includes a longitudinal flute that removes wood fiber as the screw enters, which lowers driving torque and reduces the chance of splitting compared to a plain sharp point, especially near edges.
In most softwood, plywood, MDF, and particleboard, yes. The nibs under the flat head mill material away as the screw seats, letting the head sit flush without a pre-drilled countersink. In very hard or dense wood, a countersink pass may still help.
This screw uses a coarse thread, which is matched to softwoods, plywood, and engineered panels rather than hardwood face-frame stock. For hardwood maple, oak, or cherry face frames, a fine-thread face-frame screw is the correct choice.
The pail can move to wherever the work is happening, which reduces the back-and-forth to a fixed supply shelf. At 7000 pieces, it also supports extended production runs without frequent restocking.
When the job calls for a controlled, flush-seating fastener in thin or layered stock, the Würth #8 x 1" assembly screw delivers: coarse thread for panel materials, a Type 17 point that starts clean, nibs that countersink on the fly, and a square drive designed for steady bit engagement through a long production run.
Sold In: 7000 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  WW90210 Mfr# 0614176153961 1 | #2 x 1" Square Drive Insert Bit, 2 Piece Bit | ||||
Sold in: 1 Each |  WW90220 Mfr# 0614176139961 1 | #2 x 2" Square Drive Insert Bit, 2 Piece Bit | ||||
Sold in: 1 Each |  WW90230 Mfr# 0614176140961 1 | #2 x 3" Square Drive Insert Bit, 2 Piece Bit | ||||
Sold in: 1 Each |  WW90240 Mfr# 0614176142961 1 | #2 x 4" Square Drive Insert Bit, 2 Piece Bit | ||||
Sold in: 1 Each |  WW90260 Mfr# 0614176143961 1 | #2 x 6" Square Drive Insert Bit, 2 Piece Bit |