Nickel Finish And Wide-Swing Half Overlay Performance

This Salice Series 200 concealed hinge is built for half overlay doors on face-frame and frameless cabinets, opening to 155 degrees with a self-close spring and a dowel mount for production-ready installation in either cabinet construction type.

Key Features

• 155 degree opening angle swings the door back nearly flat for wide, unobstructed access to the cabinet interior.
• Self-close spring pulls the door shut automatically once it reaches the closing arc.
• Half overlay, half crank arm positions the door at a partial overlap of the cabinet side, the geometry two doors use on a shared center partition.
• Dowel mount presses the cup into pre-bored dowel holes for fast, tool-free door installation in production environments.
• Works on face-frame and frameless cabinets when paired with the matching Salice base plate, sold separately.
• Nickel finish on steel coordinates with nickel pulls, knobs, and other visible hardware across the run.

Where the 155 Degree Swing Earns Its Place

A standard 110 degree hinge opens a door about a third of the way around. This one goes to 155 degrees, which brings the door close to parallel with the cabinet side and clears the opening nearly completely. That range matters on tall pantry cabinets, appliance garages, and any run where a door swinging into a narrow aisle or adjacent wall needs to fold back as far as possible without a stop. The half crank arm places each door at a partial overlay, which is the correct geometry wherever two doors meet on a single partition. The 35mm cup bores into the door at a 45mm bore pattern, and the dowel mount presses in without cup screws, keeping the CNC line moving. The hinge arm then connects to a Salice base plate on the cabinet, which is ordered separately and matched to your cabinet construction.

Steel Build in a Finish That Coordinates

The hinge body is steel, plated in a nickel finish. In a visible or semi-visible install, the nickel reads the same family as satin nickel pulls, bar handles, and other hardware running across the same project. Salice's arm construction on this series is slide-on, which locks to the plate with a set screw rather than clipping on without tools. The self-close spring draws the door shut from a few degrees open, which is a practical default for cabinets that see regular, hands-full use. This hinge does not have integrated soft-close damping. For a cushioned, quiet close at this angle, a separate soft-close adapter is the path, and it should be confirmed for compatibility with this series before ordering.

The Right Fit for This Hinge

This hinge is a natural call for cabinet shops and contractors running face-frame or frameless projects where wide swing and half overlay overlap at the same door. It suits multi-unit residential work, hospitality builds, and anywhere a shared-partition door layout benefits from the extra clearance the 155 degree arc provides. Standard door thickness for this cup is in the 16 to 22mm range. The SAP description references thick-door use, but the 11mm cup depth and 35mm cup diameter are consistent with a standard-thickness door rather than a dedicated thick-door design. Confirm door thickness fits the standard window before specifying. The hinge requires a Salice base plate matched to your cabinet type, sold separately. Salice plates are not interchangeable with plates from other brands.

Common Questions

Wide Access, Solid Close, Clean Nickel Across the Run

Specify this hinge when the job calls for a shared-partition door that swings wide, closes on its own, and holds a nickel finish consistent with the rest of the hardware on the project.