Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PVC edgebanding in this roll gives a defined edge treatment for panels, so finished work gains a consistent look across cabinet and casework runs. The material is PVC edge banding, which provides a uniform profile where raw panel edges would otherwise show. The width of 15/16 inch covers typical panel thickness while allowing a small trim margin, so installers can flush-trim cleanly to the face without starving the edge. The 0.018 inch thickness creates a slim, low-profile edge, which helps finished parts read visually flat with surrounding laminate. The color is 7717M white matte, so the surface presents a non-gloss appearance that tracks with matte laminate finishes. Supplied as a 600 foot roll, the product supports longer production runs or multiple jobs from a single coil, reducing mid-project changeover on the edgebander.
The 15/16 inch dimension gives coverage beyond a typical panel thickness, so operators have enough excess to center the tape, run it through the edgebander, and trim both sides back to the substrate. The 0.018 inch thickness means knives and trimmers remove less material per pass, which can help maintain a smooth transition between edge and face on laminated components. Being supplied as a continuous 600 foot roll allows the edgebander to run longer between roll changes, so nested or batch-cut parts can move through the line with fewer interruptions. The PVC construction provides a consistent profile for normal processing steps such as trimming and scraping, helping edges sit flush once the banding is worked to the panel.
The product is PVC edgebanding in color 7717M white matte, so it suits projects built around white matte decorative surfaces. The web description states a color match reference to Formica 949 White with a matte-related finish designation, so laminate-based work using that design can maintain a coordinated appearance along exposed panel edges. As an edge banding, it works on panel sides, door edges, and shelving edges where raw substrate would otherwise be visible. The 15/16 inch width gives coverage appropriate for standard panel builds, so cabinet boxes, partitions, and finished ends gain an edge detail that stays within normal fabrication practices on edgebanding machinery.
The 0.018 inch thickness defines how the edge meets the laminate surface, so the transition from face to edge can be trimmed and scraped to lie nearly flush without a heavy edge line. This is useful where designers specify a lighter visual edge while still using PVC edgebanding. The 7717M white matte appearance means the edge does not introduce additional gloss around door and drawer fronts, so finished assemblies keep a continuous matte look when viewed across banks of cabinets. The 600 foot roll length provides a single, continuous supply of the same color and finish, so a run of parts stays visually consistent from first piece to last. The PVC material works with typical edgebander settings for similar thin-gauge banding, so shops can align feed and trimming processes to match other 0.018 inch products in their workflow.
The product is PVC edgebanding, which provides a uniform synthetic edge on panel work and supports standard processing such as trimming and scraping in cabinet shops.
The edgebanding is 15/16 inch wide, so it covers typical panel edges with extra width that allows trimming both sides back to a clean, flush edge.
The 0.018 inch thickness creates a thin edge, so trimming removes a small amount of material and leaves a subtle transition between the banded edge and the laminate face.
The roll length is 600 feet, so shops can run extended batches of parts with the same color without changing coils during a typical production run.
The 7717M code specifies a white matte color, so the banding presents a low-sheen white edge suited to matte decorative surfaces in cabinet and casework projects.
The web description lists a color match reference to Formica 949 White with matte-related finishes, so it is aimed at coordinating edges with that laminate design.
This PVC edgebanding, in 15/16 inch width and 0.018 inch thickness, is set up for standard panel edges where a slim, white matte line is desired. The 7717M color reference and Formica 949 White color match detail align the product with white matte laminate projects, so cabinet, casework, and shelving edges can follow the same visual story as the faces. With 600 feet on the roll, a single coil covers a range of parts or multiple jobs. For work centered on white matte decorative surfaces, this roll offers a defined set of dimensions, finish, and length ready for shop edgebanding equipment.
Sold In: 600 Lineal Ft