
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Iron-a-Way Non-Electric Ironing Center is a recessed ironing board cabinet that mounts into a wall opening, turning an unused cavity into a fixed ironing station that stays ready without taking floor space. The center uses a 42 inch ventilated steel ironing board, so steam and heat pass through the board surface, which helps fabric dry as you work and keeps the board cooler in regular use. Outside dimensions of 14-1/2 inches wide by 51 inches high by 3-3/4 inches deep define the cabinet size, which matters when planning wall layout between studs and around nearby cabinets. The rough-in opening size of 14-1/2 inches by 51 inches by 3-7/8 inches sets the cutout dimensions, giving installers a clear target for framing and drywall work. The exterior is unfinished, allowing finishing to match surrounding trim so the installed unit blends into the room design.
The stated rough-in opening of 14-1/2 inches wide by 51 inches high by 3-7/8 inches deep provides the key dimension set for cutting into drywall and framing a pocket, so the cabinet body sits flush and stable in the wall. Outside dimensions of 14-1/2 inches by 51 inches by 3-3/4 inches show how much of the unit is visible after mounting, which helps align casing or trim with nearby doors or cabinets. Because the unit is non-electric, no wiring runs are part of the cabinet specification, so wall preparation focuses on structural opening size and finish alignment rather than electrical layout. The ventilated steel ironing board works within this recessed footprint, folding out from the cabinet area to use full length while staying anchored in a fixed position.
The 14-1/2 inch by 51 inch outside cabinet size fits projects that can dedicate a tall, narrow wall bay, such as laundry areas, closets, or utility spaces, where vertical openings are easier to frame than wide ones. The rough-in opening of 14-1/2 inches by 51 inches by 3-7/8 inches aligns well with common stud spacing, which helps installers set the cabinet between framing members without reorganizing entire wall sections. The 42 inch ventilated steel ironing board suits jobs where users handle full-size garments, since the board length supports shirts, slacks, and similar pieces without constant repositioning. Because the board is steel and ventilated, it performs effectively in routine residential ironing where steam use and heat build-up are common.
The specified rough-in depth of 3-7/8 inches allows the cabinet body to recess into typical interior wall builds, so the outside depth of 3-3/4 inches presents a low-profile face that sits close to the finished surface. That relationship between opening depth and outside depth helps achieve a stable mount where the flange or face frame rests neatly against drywall or other wall finishes. The unfinished exterior gives finish carpenters freedom to prime, paint, or stain to match existing trim schedules, which keeps the ironing center aligned with the room finish plan rather than dictating a preset color. The integrated 42 inch ventilated steel ironing board paired with its cover and pad creates a predictable surface height and feel, so users experience the same board response every time they lower it from the cabinet. That consistency benefits repeat ironing tasks where operators rely on a familiar surface for speed and accuracy.
The Iron-a-Way Non-Electric Ironing Center has outside dimensions of 14-1/2 inches wide by 51 inches high by 3-3/4 inches deep, which defines the visible footprint on the finished wall.
The IAW42NDU ironing center uses a rough-in opening size of 14-1/2 inches wide by 51 inches high by 3-7/8 inches deep, guiding framing and cutout work during installation.
The ironing center contains a 42 inch ventilated steel ironing board, providing a long surface suited to full garments during typical laundry or wardrobe work.
The board in the Iron-a-Way Non-Electric Ironing Center is ventilated steel, allowing heat and steam to pass through the surface as garments are pressed.
The Iron-a-Way Non-Electric Ironing Center is a non-electric model, so its installation focuses on wall rough opening dimensions rather than electrical connections.
The exterior of the IAW42NDU ironing center is unfinished, allowing finishing trades to apply paint or stain that matches surrounding room elements.
The Iron-a-Way Non-Electric Ironing Center pairs a 42 inch ventilated steel ironing board with a recessed cabinet sized at 14-1/2 inches by 51 inches, giving projects a defined, repeatable wall opening. With a rough-in specification of 14-1/2 inches by 51 inches by 3-7/8 inches and an unfinished exterior, the IAW42NDU model fits jobs where framing dimensions, finish control, and a fixed ironing location matter more than added features. For projects that match these measurements and need a built-in ironing solution, this ironing center offers a straightforward way to integrate an ironing surface into the wall plan.
Sold In: 1 Each