Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Iron-a-Way non-electric ironing center gives you a 42 inch ventilated steel ironing board inside a built-in cabinet, so the board is ready at a fixed spot and stows away when the door is closed. The 15 inch wide by 52 inch high cabinet body sets a predictable footprint in a laundry, closet, or utility wall, keeping the workstation compact and out of walk paths. The ventilated steel board surface lets steam pass through the top, helping workpieces lie flat and reducing trapped moisture during ironing. A non-electric design removes wiring from the cabinet body, which suits locations where power is already available nearby or where running a new circuit is not planned. This NE42WDU model works as a dedicated ironing station that mounts flush in the wall, giving a clean look while keeping gear in a consistent location for repeated use.
The outside cabinet dimensions of 15 inches wide by 52 inches high by 7-3/4 inches deep define the overall wall footprint, which helps plan stud bay layout and vertical positioning in a laundry or closet. A rough-in opening size of 14-3/8 inches wide by 51-1/4 inches high by 3-7/8 inches deep establishes the cutout target, guiding framing and drywall cuts so the cabinet body can sit properly in the wall. These paired dimensions give both installers and fabricators a clear reference for aligning the cabinet flush with finished surfaces, which supports clean trim lines around the perimeter. The outside door dimensions of 15 inches wide by 52 inches high by 3/4 inch thick indicate the visible panel size on the room side, helping coordinate with adjacent doors or panels. Using these measurements, the NE42WDU can be laid out to align reveals and handle height with nearby cabinetry.
The NE42WDU ironing center belongs in walls that can accept a 14-3/8 inch by 51-1/4 inch by 3-7/8 inch rough-in opening, which suits many framed laundry or utility rooms. The 7-3/4 inch cabinet depth lets the body recess into the wall while the 15 inch by 52 inch maple veneer door presents a tall, narrow panel that can visually match neighboring cabinet doors or passage doors. As a kitchen and bath cabinet accessory in the ironing board cabinets and pull-outs class, this unit is suited to cabinetry-driven spaces where a built-in look matters. The unfinished maple veneer wood door allows on-site staining, clear coating, or painting, so designers can align the ironing center with base cabinets, tall pantry units, or closet systems without being locked into a factory finish.
The ventilated steel ironing board in this product distributes steam through the surface, which helps moisture move away from garments and supports even pressing across the 42 inch length. The ironing board cover and pad pair with this steel top to create a smooth, cushioned surface, helping reduce imprinting from seams or buttons during normal ironing. Hot iron storage keeps the iron parked in a defined cavity, which helps the workspace return to a clean state quickly and leaves the 42 inch board clear when starting the next garment. Storage shelves inside the same cabinet organize supplies so they stay within arm reach of the board, reducing walking around during a load of shirts or linens. A garment bar gives a ready spot to hang pressed clothing, which helps preserve the finish achieved on the ventilated steel board. The full length piano hinge carries the door weight along its entire 52 inch height, supporting repeated opening and closing while keeping the door aligned to the face of the cabinet body.
The NE42WDU cabinet has outside dimensions of 15 inches wide by 52 inches high by 7-3/4 inches deep, which defines the wall area needed for placing the ironing center.
The ironing center uses a rough-in opening of 14-3/8 inches wide by 51-1/4 inches high by 3-7/8 inches deep, guiding framing and cutout size for a proper recessed fit.
The NE42WDU contains a 42 inch ventilated steel ironing board, giving a generous work length for everyday garment and linen pressing.
The ironing center uses a wood flat door with unfinished maple veneer, allowing finishing to coordinate with surrounding cabinetry or trim work.
The NE42WDU includes hot iron storage, giving the iron a defined location inside the cabinet so it stays organized between ironing sessions.
The ironing center provides storage shelves, hot iron storage, a garment bar, and an ironing board cover and pad, organizing tools and garments at the ironing station.
The Iron-a-Way non-electric ironing center NE42WDU combines a 42 inch ventilated steel ironing board, hot iron storage, storage shelves, garment bar, and an unfinished maple veneer wood door in one recessed cabinet. With outside dimensions of 15 inches by 52 inches by 7-3/4 inches and a defined 14-3/8 inch by 51-1/4 inch by 3-7/8 inch rough-in opening, it gives clear sizing for wall integration. For projects needing a built-in ironing solution that aligns with cabinetry and keeps ironing gear organized in a fixed location, this ironing center provides a focused, wall-mounted workspace ready for regular use.
