Pro Value Series table lift is a sit-to-stand workstation base that raises and lowers work surfaces for adjustable-height use, so installers can build ergonomic desks and benches around a proven lift system. This sit-to-stand system is part of the Pro Value Series product class, tying into a broader hardware range for workspace projects and letting shops standardize on one style. The 2-leg, 3-section design forms the core support structure, which matters when setting up stable rectangular tops in offices, shops, or multimedia spaces. A gray finish on the frame establishes a neutral look that blends into most commercial and residential environments, simplifying design coordination. The system is classified under sit-to-stand systems, so it is aimed at height-adjustable workstation builds rather than fixed tables. A 5 year warranty backs the lift, providing defined support life for planning projects and service expectations.
The height adjustment range of 25-13/16 inches lowest position to 48-5/8 inches highest position defines how low and high the surface can travel, guiding top selection and clearance planning under windows, cabinets, or equipment. The stated lowest position of 22-13/16 inches and highest position of 48-5/8 inches describes the working envelope, which matters when matching seated and standing ergonomics for different user sizes. A width range of 43-5/16 inches to 63 inches lets installers size the frame to various top widths, important for fitting individual desks or wider work surfaces within room layouts. Foot length of 27-1/2 inches gives the front-to-back footprint of each support, informing stability and how close the desk can sit to walls or other furniture. These numeric ranges translate directly into layout drawings and field measurements.
This sit-to-stand workstation frame is identified for multimedia and workspace components, so it suits adjustable desks, technical benches, and similar installations in office or shop environments. The 2-leg configuration supports typical rectangular tops, which aligns with standard desk widths covered by the 43-5/16 inch to 63 inch adjustable frame width. A leg profile identified as rectangular creates a clean structural line that pairs well with straight-edged tops common in commercial interiors. Gray finish complements many laminate and surface materials used in woodworking and millwork projects, which helps designers maintain consistent visual themes across multiple stations. The non-scratch glides and casters support projects where desks may be shifted within a room, letting installers slide or roll bases during layout changes while protecting finished flooring. Total weight capacity of 285 lbs means this frame can serve computer work, light assembly, or paperwork stations where equipment and materials stay within that load.
Two motors built into the legs drive the lifting action, providing powered movement that allows the user to shift between the 22-13/16 inch low and 48-5/8 inch high positions without manual lifting of the top. The 3-section leg design gives multiple telescoping segments, which supports the wide height adjustment range while keeping a compact footprint for sit-to-stand transitions. An LED display that shows height in inches aids installers during commissioning because they can dial in specified heights exactly and record them for facility standards. The ability to preset up to 4 different heights with a 3-programmable positions feature means users can return to commonly used working levels quickly, supporting repeatable ergonomics day to day. Collision sensors that detect obstructions during raising or lowering protect tops, cable runs, and nearby casework when users adjust the workstation in tight spaces. UL Listed status and ANSI/BIFMA testing indicate the lift has been evaluated against recognized electrical and furniture performance criteria, which matters in commercial projects with specification requirements. A shipping weight of 61.7 lbs gives a sense of the frame mass, which translates into a substantial base for stability once installed. The 5 year warranty ties these functional details to a defined service timeframe that facility planners can factor into lifecycle expectations.
This table lift offers a height adjustment range from a lowest position of 22-13/16 inches up to 48-5/8 inches, so work surfaces can serve both seated and standing tasks within that span.
The Pro Value Series table lift has a total weight capacity of 285 lbs, which sets the combined limit for the worksurface, equipment, and materials placed on the adjustable frame.
The LED display shows exact height in inches, allowing installers to match specified dimensions, align multiple stations, and record consistent settings across a workspace.
The table lift frame adjusts from 43-5/16 inches to 63 inches in width, so it can support various rectangular top sizes within that width range.
Collision sensors detect obstructions when raising or lowering, helping protect the top, nearby furniture, and cabling during height changes in occupied work areas.
This sit-to-stand system is UL Listed, ANSI/BIFMA tested, and backed by a 5 year warranty, supporting use in projects that specify recognized performance and coverage.
This Pro Value Series table lift combines a 2-leg, 3-section sit-to-stand design with a 25-13/16 inch to 48-5/8 inch height range, giving installers a defined envelope for ergonomic desks. The 43-5/16 inch to 63 inch width range supports common top sizes, while the 285 lb capacity suits many office and light-duty work applications. LED height readout, programmable positions, and collision sensors simplify setup and everyday adjustment, bringing repeatable performance to each station. For projects needing a gray-finished, UL Listed, ANSI/BIFMA tested sit-to-stand system with a 5 year warranty, this frame offers a clear, spec-driven choice.
Sold In: 1 Each