Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
standoff for privacy panels double sided is used to install a privacy panel between adjacent work surfaces, so installers can create separation without changing the desk layout. This Pro Value Series standoff is double sided, so it holds the panel securely between two desks rather than off a single edge, which keeps the panel centered and stable. The brushed nickel finish gives the standoff a neutral, project-friendly look that blends into typical commercial or home workspace hardware. The part is identified as B3322-BSN, so job planners can reference a consistent model across drawings, bids, and reorders. As a standoff in the Standoffs product class, it is designed specifically for spacing and supporting panels, which simplifies selecting hardware when planning privacy or divider installations.
This Pro Value Series standoff is installed between two 1 inch thick desks, so layout planning can assume a snug fit with typical panel-ready worktops. The adjustable width for panels up to 5/8 inch thick lets installers size the grip to the actual panel, which helps hold the privacy panel firmly without crushing thinner materials. Because the part is used to install a privacy panel, its geometry is oriented around keeping the panel upright between the two worksurfaces, which is important when aligning tops, edges, and any cable pass-throughs or cutouts near the divider. The brushed nickel finish presents a finished look at desk edges, which matters when privacy dividers are visible to end users or clients.
This standoff for privacy panels double sided is used to install a privacy panel between two 1 inch thick desks, so it is suited to shared workstations, benching layouts, or paired desks that need a center divider. Because it is installed between two desks rather than at the perimeter of one surface, it works where equal support from both worktops is available, such as back-to-back or side-by-side desk runs. The adjustable width for panels up to 5/8 inch thick lets this B3322-BSN standoff handle common panel substrates, such as composite or similar materials within that thickness range, so designers can switch panel materials within that limit without changing the hardware model. As a Standoffs category product from Wurth Baer Supply, it fills the specific role of spacing the panel between the desks, which simplifies project planning when separating task areas or defining personal zones in open offices.
The adjustable width for panels up to 5/8 inch thick means the B3322-BSN standoff can clamp or hold different panel thicknesses, so installers can fine-tune the fit to reduce panel wobble in daily use. Being double sided, the standoff engages both 1 inch thick desks, which helps keep the privacy panel centered on the joint between work surfaces and reduces the tendency for the panel to lean toward one user. The brushed nickel finish provides a neutral appearance that coordinates with many existing pulls, grommets, and desk frames, so the privacy panel hardware does not visually dominate the workstation. Identifying the product as Pro Value Series Standoff for Privacy Panels Double Sided, Brushed Nickel B3322-BSN gives project managers a clear line item, which supports consistent specification across multiple stations or floors. Since the standoff is classified in the Standoffs product class, it is engineered around spacing and support, which matters when repeatable alignment and uniform gaps are important across a row of desks.
The Pro Value Series B3322-BSN standoff is used to install a privacy panel, so it supports a divider between work areas using a dedicated spacing component.
The B3322-BSN standoff has adjustable width for panels up to 5/8 inch thick, allowing it to fit various panel materials within that range.
The Pro Value Series B3322-BSN is installed between two 1 inch thick desks, positioning the privacy panel along the shared edge of the work surfaces.
The brushed nickel B3322-BSN standoff provides a neutral, finished look that coordinates with common workspace hardware while supporting the privacy panel.
The B3322-BSN is in the Standoffs product class, so it is intended for spacing and supporting panels in workstation or similar layouts.
The double sided B3322-BSN design connects to two 1 inch thick desks, helping keep the privacy panel centered and supported from both sides.
The Pro Value Series Standoff for Privacy Panels Double Sided, Brushed Nickel - B3322-BSN matches projects that use two 1 inch thick desks with a divider between them. Its adjustable width for panels up to 5/8 inch thick means one standoff style can serve across multiple stations that share similar panel thicknesses. Because it is used to install a privacy panel and sits in the Standoffs product class from Wurth Baer Supply, it fits straightforwardly into workstation layouts that call for a stable, centered divider along the desk joint. For jobs needing a brushed nickel double sided standoff in this configuration, B3322-BSN is the targeted part number to specify and source.
Sold In: 1 Each