Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Greenwich pull gives you an 8-13/16 inch center to center handle that spans wider drawer fronts and doors, so you can line up drilling and layout across a bank of cabinets. Made by Belwith Keeler in the Greenwich collection, this pull keeps a consistent look wherever that series is used in a project. The stainless steel finish provides a neutral, project-friendly appearance that coordinates with common appliance and fixture finishes in kitchens and bathrooms. The pull is made from zinc, which keeps weight manageable during repetitive installs while still delivering a solid hand feel for everyday cabinet use. With an overall length of 10 inches, this pull visually fits larger cabinet faces, helping your layout read correctly on wider fronts. A projection of 1-3/8 inches creates operating clearance between fingers and the cabinet face, which helps with clean grabs even on thicker doors and drawer fronts.
The 224 mm center to center drilling dimension on the Hickory Hardware Greenwich pull sets a clear mounting pattern, so hole locations stay predictable on each cabinet face. This measurement lets installers rely on metric or imperial jigs that match 8-13/16 inch spacing, which helps speed layout on rows of doors or drawer fronts. With a 10 inch overall length tied to that drilling pattern, the pull extends just past the mounting points, giving an even look at each end when centered on a panel. The 1-3/8 inch projection gives enough stand-off so doors can open without hands brushing the cabinet frame, which is helpful where doors sit close to walls or adjacent cabinets. At 1/2 inch width, the pull maintains a low visual bulk while still presenting a continuous mounting line across multiple fronts.
The Hickory Hardware Greenwich pull from the Greenwich collection is intended for kitchen and bathroom projects, so its 8-13/16 inch center to center size suits base cabinets, larger wall cabinets, and wide drawers in those spaces. The stainless steel finish pairs with typical stainless appliances and many sink and faucet finishes, aligning the pull with other metal elements around the room. Because the pull uses a 224 mm center to center layout, it can be repeated across long cabinet runs where consistent spacing is needed for a unified look. The 10 inch overall length gives proportion on tall pantry doors or oversized drawers, helping hardware match the scale of those faces. With its zinc construction, the pull provides a metal feel suited to frequently used kitchen and bathroom cabinets.
The 224 mm center to center measurement on this Belwith Keeler cabinet pull provides a fixed reference for templates, letting installers transfer the same pattern quickly from one cabinet face to the next. This repeatable spacing reduces layout variation when multiple Greenwich series pulls are used in a project. The 1-3/8 inch projection keeps the gripping surface out from the door or drawer front, which helps users get fingers behind the pull, even when fronts are thicker or have edge profiles. A 1/2 inch width contributes to a streamlined look, so a full bank of cabinets fitted with this pull shows a continuous, narrow line rather than a bulky strip. The combination of zinc material and stainless steel finish means the pull presents as metal in both structure and look, aligning with typical decorative hardware expectations on residential cabinetry.
The Hickory Hardware Greenwich pull with 8-13/16 inch center to center drilling works well on wider doors and drawers, giving them proportionate hardware spacing across kitchen and bathroom cabinet faces.
The 224 mm center to center measurement provides a fixed pattern that aligns with metric or imperial jigs, helping installers repeat hole locations quickly on multiple cabinet fronts.
The P3041-SS stainless steel finish pull has an overall length of 10 inches, which visually matches larger doors and drawers where a longer handle is preferred for scale.
This Belwith Keeler cabinet pull projects 1-3/8 inches from the cabinet face, creating enough hand clearance for a comfortable grip when opening doors and drawers.
The Hickory Hardware Greenwich pull is made from zinc, giving a metal construction that supports a solid hand feel on frequently used residential cabinets.
The stainless steel finish gives the pull a neutral metallic look that coordinates with many common kitchen and bathroom fixtures, helping hardware blend into overall room design.
The Hickory Hardware Greenwich pull with 224 mm center to center drilling, 10 inch overall length, and 1-3/8 inch projection offers a defined set of dimensions for kitchen and bathroom cabinets. The stainless steel finish and zinc construction provide a metal look and feel suited to residential hardware runs. When a project calls for a longer, Greenwich collection pull across wider doors or drawers, this P3041-SS model from Belwith Keeler supplies a consistent mounting pattern and appearance for cabinet layouts.
Sold In: 1 Each
