Hickory Hardware Greenwich pull gives you an 18 inch center to center handle designed for straightforward cabinet and drawer use. The 18 inch center to center layout sets consistent hole spacing, which matters when drilling new fronts or matching existing bores on wider doors and drawers. The pull comes from the Greenwich collection, so its smooth arc profile delivers a single continuous grip line, helpful on larger cabinet faces where multiple smaller pulls are not desired. The polished nickel finish provides a bright, reflective surface, which affects how the hardware visually ties into polished faucets or appliances in a kitchen or bathroom. The pull uses a zinc material construction, giving a solid metal body that suits everyday cabinet door and drawer operation. The brand Belwith Keeler places this piece within its decorative handles and pulls class, aligning it with typical residential cabinet hardware workflows.
The 18 inch center to center measurement defines the exact distance between fastener points, which sets the drilling layout for new cabinet doors, drawer fronts, or panel applications. This predictable spacing helps lay out symmetrical handle positions across banks of drawers. The overall length of 19-1/4 inches gives an edge-to-edge dimension that matters when checking clearance to adjacent doors, wall panels, or appliance trims. With a projection of 1-3/8 inches off the surface, the pull stands out far enough to grasp while still staying relatively close to the face, which affects how it behaves around nearby drawers or doors. The 1/2 inch width controls how much flat bearing surface the hand contacts, contributing to a slim yet usable grip along the arc of the handle.
This 18 inch center to center pull is identified for cabinet hardware use in the decorative handles and pulls category, so it aligns with typical kitchen and bathroom cabinet layouts. The long 18 inch span supports mounting on wide drawer fronts, where a larger handle helps distribute the pulling force across more of the drawer face. The Greenwich collection arc shape forms a continuous curve, which suits applications on doors where a more linear bar might feel too rigid. The polished nickel finish pairs naturally with other polished metal elements, allowing this pull to act as a visual bridge between hinges, faucets, and appliances in the same room. Because the overall length reaches 19-1/4 inches, the pull can visually center large cabinet faces, helping tie together tall pantry doors or paired drawer stacks in one design line.
The precisely stated 18 inch center to center spacing enables repeatable drilling patterns, which matters when installing multiple pulls across a run of cabinets and aiming for consistent alignment. The 1-3/8 inch projection sets a defined offset that keeps fingers from scraping the cabinet face during use, supporting comfortable daily operation. With a 1/2 inch width, the pull keeps a lean profile, which can reduce visual clutter when many handles are installed in a tight grid. The zinc material construction provides a uniform metal substrate under the polished nickel finish, which supports a consistent appearance across every pull on the job. The defined overall length of 19-1/4 inches helps plan clearances near edges, corners, or adjacent hardware, guiding placement so drawers and doors can operate without the handles clashing. Being part of the Greenwich collection also standardizes the design language, allowing multiple pulls of this style to work together across a multi-cabinet installation.
The Hickory Hardware Greenwich pull has an 18 inch center to center dimension, which sets the hole spacing and allows consistent mounting across wide cabinet doors and drawers.
The pull has an overall length of 19-1/4 inches, giving extended coverage on the cabinet face and helping it visually anchor larger drawers or tall doors.
The polished nickel cabinet pull projects 1-3/8 inches from the cabinet surface, providing finger clearance behind the handle while keeping the profile relatively close to the door or drawer front.
The P3375-14 cabinet pull is made from zinc, giving it a metal body suitable for regular cabinet door and drawer operation in typical residential settings.
This Greenwich collection pull uses a polished nickel finish, creating a bright, reflective surface that coordinates with other polished metal elements in kitchens or bathrooms.
The cabinet handle belongs to the Hickory Hardware Greenwich collection and is produced under the Belwith Keeler brand, aligning it with decorative handles and pulls.
The Hickory Hardware Greenwich pull with 18 inch center to center spacing, 19-1/4 inch overall length, and 1-3/8 inch projection offers defined dimensions that streamline cabinet layout work. The polished nickel finish and zinc construction provide a consistent metal handle suited to kitchen or bathroom cabinet faces. With its Greenwich collection arc design and 1/2 inch width, the pull delivers a slim, continuous grip line along wider drawers and doors. For projects that call for a long, polished nickel handle in the Belwith Keeler family, this P3375-14 model aligns with standard cabinet drilling patterns and decorative hardware plans.
Sold In: 1 Each
