Hickory Hardware Eclipse Pull For Cabinets
Hickory Hardware Eclipse pull gives a 3 inch center to center grip that works well on many cabinet and drawer layouts where a consistent drilling pattern is important. The pull comes from the Eclipse collection, so its profile follows a coordinated design line that keeps a project visually unified across multiple openings. Vintage bronze finish creates a darker, traditional tone that suits cabinets needing a warmer metal color. The pull is made from zinc, which provides a solid metal body that stands up to regular hand contact on frequently used doors and drawers. Overall length of 4-7/16 inches leaves a little over half an inch beyond each screw hole for finger clearance and proportion on typical cabinet faces. A projection of 15/16 inch gives space behind the pull for fingers while staying close to the surface.
Key Details That Support Cabinet Projects
- The 3 inch center to center measurement sets a standard drilling dimension, which simplifies layout when repeating the pull across a run of doors or drawers and helps align with many existing 3 inch hole patterns during replacements.
- The 4-7/16 inch overall length balances the 3 inch hole spacing, so the pull covers the screw area cleanly while still looking scaled appropriately on standard cabinet rails and drawer fronts.
- The 15/16 inch projection keeps the pull from sticking out too far into walkways, while still allowing fingers to wrap behind the grip comfortably during everyday opening and closing.
- The 15/16 inch width provides a consistent bar thickness, giving a defined edge to grasp that feels predictable on repeated use across a kitchen, bath, or built-in installation.
- The vintage bronze finish sets a darker metallic tone that can coordinate with other bronze-colored decorative hardware in the space for a unified project look.
- The zinc material forms a metal body that handles repeated pulling on high-use cabinets, which is important on kitchens and work areas where hardware is used many times a day.
Mounting Size And Fit For Replacement Work
The 3 inch center to center measurement on the Hickory Hardware Eclipse pull provides a clear mounting size for new drilling or swap-outs where existing 3 inch holes are already present. With an overall length of 4-7/16 inches, the pull extends modestly beyond the screw points, which helps cover the immediate area around the holes without overwhelming narrower rails. Its 15/16 inch projection keeps the hand space predictable from door to door, helping maintain even clearance in tight galley runs or small bath spaces. Width at 15/16 inch creates a steady grip profile, so each pull in a bank of drawers feels the same under hand.
Using This Eclipse Pull In Cabinet Projects
Where The 3 Inch Eclipse Pull Works Best
The Hickory Hardware Eclipse pull from the Eclipse collection fits cabinet and drawer applications that call for a 3 inch center to center drilling dimension, which is a common spacing in many residential and light commercial layouts. Vintage bronze finish supports installations where a deeper metal color ties in with stained woods or other bronze-toned hardware, keeping the overall look consistent across doors and drawers. With a 4-7/16 inch overall length, the pull pairs well with typical cabinet stiles and drawer fronts, giving enough visual weight without dominating narrower faces. The zinc construction makes the pull suitable for spaces where hands will contact the hardware frequently, such as kitchens or shop storage, because the metal body is built for repeated use.
Details That Help Achieve Repeatable Results
The 3 inch center to center drilling on the P431-VB cabinet pull lets installers use a single jig setting for an entire run, which can speed up production work and keep alignment consistent from cabinet to cabinet. A projection of 15/16 inch holds the grip close to the surface, which helps maintain uniform clearance in tight corridors while still providing space for fingers, reducing the chance of uneven protrusions along a bank of cabinets. The 15/16 inch width creates a uniform gripping surface, so users feel the same edge and thickness on every door and drawer. Pairing vintage bronze finish with zinc material keeps both appearance and structure in line, giving projects a coordinated finish and a solid metal pull that performs the same across all installed pieces.
Common Questions About The P431-VB Eclipse Pull
What drilling size does the Hickory Hardware Eclipse pull use?
The Hickory Hardware Eclipse pull uses a 3 inch center to center drilling size, which matches many existing cabinet hole layouts and supports consistent spacing on new installations.
How long is the P431-VB cabinet pull overall?
The P431-VB cabinet pull has an overall length of 4-7/16 inches, so it extends slightly beyond the mounting holes for good coverage and proportion on standard cabinet fronts.
What projection does this vintage bronze cabinet pull have?
The vintage bronze cabinet pull has a projection of 15/16 inch, keeping the handle close to the door while leaving space behind it for fingers during everyday use.
What material is the Eclipse collection pull made from?
The Eclipse collection pull is made from zinc, providing a metal body that handles repeated opening and closing on cabinets and drawers in busy spaces.
How wide is the Hickory Hardware drawer pull grip area?
The Hickory Hardware drawer pull has a width of 15/16 inch, creating a consistent bar thickness that gives a defined edge to grasp across multiple cabinets.
What type of finish does the P431-VB pull have?
The P431-VB pull has a vintage bronze finish, supporting projects that call for a darker, warm-toned metal look on cabinet and drawer fronts.
Selecting This Pull For Your Next Cabinet Run
The Hickory Hardware Eclipse pull with 3 inch center to center drilling, vintage bronze finish, and zinc construction delivers a defined set of dimensions for layout and replacement work. With 4-7/16 inch overall length, 15/16 inch projection, and 15/16 inch width, it offers repeatable sizing across doors and drawers. For projects using the Eclipse collection or targeting a vintage bronze look, this Belwith Keeler pull gives a consistent hardware choice ready for new installations and updates.
