Hickory Hardware Cavalier 3 inch pull is a zinc cabinet handle in a satin nickel finish designed for doors and drawers where a 3 inch center to center pull is needed. The Cavalier collection is described as one of Hickory Hardware's most diverse collections, which positions this pull as a flexible choice for different rooms that share the same hardware line. The 4-3/4 inch overall length gives extra gripping area beyond the 3 inch mounting span, which helps when opening wider or heavier cabinet fronts. A projection of 5/16 inch sets the pull close to the cabinet surface, which keeps a low profile while still providing a defined edge to grab. The 1/2 inch width keeps the look narrow, which supports layouts with tight visual spacing between multiple handles.
The 3 inch center to center measurement on this Belwith Keeler pull sets the distance between mounting points, which is important when drilling new holes that must align with the pull posts. The 4-3/4 inch overall length shows how much of the handle spans across the cabinet surface, which helps position the pull relative to door edges or drawer fronts for a balanced layout. A projection of 5/16 inch keeps the pull mounted close to the face of the cabinet, which can be useful in tight spaces where deeper hardware might interfere with nearby doors or walls. The 1/2 inch width defines the front-to-back profile of the gripping area, which contributes to how the handle feels in hand along a run of cabinets.
The Cavalier collection is described as one of Hickory Hardware's most diverse collections, which supports using this satin nickel cabinet handle across kitchens, bathrooms, or an entry way that share the same design line. The satin nickel finish provides a consistent tone across these spaces, which helps tie together cabinet runs where doors, drawers, and built-ins all use the same P135-SN satin nickel pull. The 3 inch center to center layout fits cabinet and drawer fronts sized for this common drilling pattern, which is frequently used on residential cabinetry and makes it straightforward to apply the same handle on upper cabinets, base cabinets, and furniture-style pieces.
The defined 3 inch center to center spacing on this Hickory Hardware Cavalier pull allows installers to reuse standard drilling templates that match that dimension, which helps repeat the same hole pattern across long cabinet runs. The 4-3/4 inch overall length gives a clear reference for positioning the pull relative to panel edges, which supports aligning handles consistently from door to door. A projection of 5/16 inch sets a predictable stand-off from the cabinet face, which can help coordinate clearances where doors open near walls, tall panels, or adjacent appliances. The 1/2 inch width remains constant across each pull, which provides a uniform visual line when multiple Belwith Keeler cabinet pull 3 inch units are installed side by side. The Cavalier naming on this P135-SN satin nickel pull identifies it within the same style family, which supports repeating the exact look in additional rooms or later phases of a project.
This Hickory Hardware Cavalier 3 inch pull has a 3 inch center to center dimension, which sets the hole spacing for mounting on cabinet doors or drawers.
The P135-SN satin nickel pull has a satin nickel finish, which provides a consistent appearance when matching other satin nickel cabinet hardware in a space.
This Cavalier series satin nickel pull is made from zinc, which keeps it in line with other zinc cabinet pulls used in decorative hardware projects.
The Belwith Keeler cabinet pull 3 inch has an overall length of 4-3/4 inch, which extends past the mounting holes to provide additional gripping area.
This cabinet drawer pull 3 inch has a projection of 5/16 inch, which keeps the handle close to the cabinet surface for a low-profile installation.
This satin nickel cabinet handle has a width of 1/2 inch, which maintains a narrow profile while providing a defined edge for gripping.
The Cavalier collection 3 inch center to center pull in satin nickel finish offers a defined set of dimensions that support consistent cabinet layouts across kitchens, bathrooms, and entry ways. The 4-3/4 inch length, 5/16 inch projection, and 1/2 inch width work together to create a repeatable profile that aligns from door to door. For projects built around Hickory Hardware's Cavalier series and Belwith Keeler decorative hardware, this P135-SN satin nickel pull provides a coordinated option whenever a 3 inch center to center handle is required.
Sold In: 1 Each
