Hickory Hardware 22" Full Extension Standard Ball Bearing Drawer Slides, Unhanded Side Mount Zinc - P1050/22-2C

22 Inch Full Extension Drawer Slides For Access

22 inch full extension drawer slides from Hickory Hardware use gliding ball bearings to create a smooth functional drawer slide, so drawers move freely under load in everyday cabinet use. The full extension travel allows access to the entire drawer, shelf, or pull-out, which helps during installation, adjustment, and everyday reach into the cabinet interior. The side mount layout matches standard side mount drawer slide practices, giving installers a familiar approach during cabinet builds and retrofits. These standard ball bearing drawer slides are unhanded, so either member can go on the left or right, which simplifies layout and reduces handling steps on the bench. A stated capacity of 100 lb means the slide is designed to support typical residential and light-duty commercial drawers within that load range, so installers can match projects that fall within this limit.

Key Drawer Slide Details For Real Jobs

• The 22 inch length is suited to cabinets built for that nominal depth, giving drawers full travel without wasted slide length.
• Full extension travel lets the drawer clear the face frame or box front, helping with access to the back of the drawer and hardware inside.
• Gliding ball bearings support smooth motion along the slide members, which helps drawers feel consistent over their travel.
• The 100 lb stated capacity defines the load these side mount ball bearing drawer slides are designed to carry, guiding where they are applied.
• Heavy duty steel construction provides a rigid slide structure, which supports the ball bearing race and helps maintain alignment under rated load.
• The side mount design follows a common cabinet construction pattern, which supports straightforward installation alongside other side mount hardware.

Side Mount Drawer Slide Fit And Setup

These side mount drawer slides use a standard side mount layout, so the slide members fasten to the drawer side and cabinet side, keeping alignment along the length of the 22 inch travel. The full extension function allows the moving member to travel fully out of the cabinet, which exposes the slide screws along the drawer and cabinet members for access during fitting and later adjustment. Because the slides are unhanded, the same P1050/22-2C part serves both left and right positions, which keeps inventory simple on site and helps match replacement work. The 100 lb capacity rating works together with the heavy duty steel construction, so when drawers are sized and loaded within that range the slide components are designed to support regular opening and closing.

Using P1050/22-2C Slides In Cabinet Work

Where These 22 Inch Slides Are Applied

These Hickory Hardware 22 inch full extension standard ball bearing drawer slides fit cabinet and furniture projects built around a 22 inch nominal drawer length, so the drawer box and cabinet depth can be laid out to match the slide. The side mount format aligns with typical kitchen, bath, and shop cabinet construction that uses side-mounted members rather than bottom-mount layouts, which keeps the installation process consistent across a job. Because they provide full extension travel, these slides suit drawers, pull-out shelves, or trays that benefit from complete access to stored items, especially when working in deeper base cabinets. The 100 lb capacity and heavy duty steel construction make them appropriate for drawers expected to handle moderate loads while keeping motion smooth. Their unhanded design allows the same slide to be used on either side, supporting straightforward stocking for production runs or service work where left and right parts do not need to be separated.

Details That Support Repeatable Slide Results

The full extension travel on this P1050/22-2C drawer slide lets the moving member extend to expose the entire drawer length, which helps during alignment because the installer can view the slide and drawer clearance along the full run. Gliding ball bearings inside the slide carry the moving member between the cabinet and drawer portions, giving a smooth functional drawer slide that helps prevent binding when the cabinet and drawer are built square. Heavy duty steel construction supports the ball bearing races and the 100 lb capacity, which matters when drawers see frequent use because the structure is designed for that stated load range. The side mount layout keeps the slide fully accessible along the cabinet interior wall, which simplifies layout lines, screw placement, and later adjustments in the field. Because these are standard ball bearing drawer slides from Hickory Hardware under the Belwith Keeler brand, installers working across multiple projects can match the P1050/22-2C part number when they need the same motion and load characteristics again.

Common Questions About These Drawer Slides

Select These Slides For 22 Inch Side Mount Jobs

Choose the Hickory Hardware 22 inch full extension standard ball bearing drawer slides P1050/22-2C when a side mount layout, full extension travel, and a 100 lb capacity align with the cabinet design. The heavy duty steel construction and gliding ball bearings work together to provide smooth motion at the stated load. The unhanded design keeps left and right use identical, simplifying planning for both new builds and replacements that call for a 22 inch slide with full extension performance.