Hickory Hardware 24" Side Mount Full Extension 100 lb Ball Bearing Drawer Slide, Zinc, P1050/24-2C

Full Extension at Maximum Standard Length, Ready for the Widest Cabinet Drawers

This is the 24 inch full-extension side-mount ball bearing drawer slide from Hickory Hardware's 1050 series, rated 100 lb per pair. At the top of the standard cabinet slide length range, it suits deep drawers in base cabinets, utility cabinets, and shop casework where shorter slides simply won't reach the back of the box.

Key Features

• 24 inch length — the longest standard increment in this series, matched to deep base cabinet and utility drawer boxes.
• Full extension — the intermediate member carries the drawer completely clear of the cabinet opening, putting the back of the box within easy reach.
• 100 lb weight rating per pair — handles a fully loaded base cabinet drawer in kitchen, office, or shop service.
• Standard motion — no soft-close, no self-close, no detent; the drawer rides freely on ball bearings and stays wherever it is left.
• Non-handed design — both slides in the pair are identical; no left-right sorting on the bench.
• Zinc-finished steel — functional indoor corrosion protection on cold-formed steel members.

Where the 24 Inch Length Earns Its Place

A 24 inch slide is the right call when the cabinet interior runs deep — think full-depth base cabinets, tall storage units, and shop benches built to a 24 inch standard. At this length, full extension matters most: without the intermediate member bringing the box completely out, the rear third of a deep drawer is dead storage. This slide eliminates that problem by carrying the entire drawer to the cabinet face so nothing gets buried. Standard motion is a practical fit here too. Deep base drawers in kitchens and shops are frequently loaded with heavy, bulky items, and a free-sliding ball bearing action lets the drawer stay exactly where it is left — fully open, halfway, or anywhere in between — without a spring or damper working against a heavy load.

Steel Construction and Zinc Finish

The slide members are cold-formed steel running on steel ball bearings in full-length raceways. That construction is what makes smooth, consistent travel possible under a 100 lb load across thousands of cycles. The zinc finish is the standard corrosion-resistant coat for indoor side-mount slides — appropriate for dry interior cabinetry. This is a working finish on hardware that sits beside the drawer box; it is not a decorative or stainless finish, and it is suited to indoor applications.

Who Reaches for the 24 Inch Pair

Cabinet shops building standard-depth base cabinet runs rely on 24 inch slides to match their drawer boxes without cutting down box length. Contractors fitting out utility rooms, laundry cabinets, and garage storage units reach for this length when the cabinet depth calls for it. Homeowners retrofitting or replacing slides in existing deep base cabinets will find the 24 inch length covers the most common full-depth drawer configuration. Because the slide is non-handed, one part number covers both sides of every drawer in the run, which simplifies ordering for shops building in volume.

The Right Length, Ready to Run

When the drawer box is 24 inches deep and full access to the back matters, this slide pairs the reach of full extension with the simplicity of standard motion — no mechanism to adjust, no damper to wear out, just smooth ball bearing travel at the longest standard cabinet length.