Rev-A-Shelf 53WC 14-3/8" Metallic Silver Bottom Mount Waste Pullout with 2-35 Quart Silver Bins Soft-Close, RS53WC-1835SCDM217

A Metallic Silver Double-Bin Waste Pullout for a Working Kitchen Cabinet

This Rev-A-Shelf 53WC pullout brings two 35 quart silver bins behind a base cabinet door, rolling both bins out together on soft-close slides so the trash and recycling stay out of sight until you need them.

Key Features

• Two 35 quart silver bins included ship with the unit ready to use, one for trash and one for recycling.
• Soft-close mechanism slows the carriage at the end of travel so it closes without slamming.
• Full-extension slides roll both bins completely clear of the cabinet for full access to the back bin.
• 90 pound weight capacity handles two fully loaded bins without straining the slide system.
• Door-mount compatible so the carriage follows the cabinet door when it opens.
• Metallic Silver powder-coat finish on the carriage coordinates with the silver bins for a unified look.

Two Bins, One Pull, One Cabinet Door

This pullout solves the most common kitchen sorting problem: where to keep both trash and recycling in a base cabinet without doubling the cabinet count. Both 35 quart bins ride on the same carriage, so one pull of the door brings everything forward. The full-extension slides clear the cabinet face entirely, which means the back bin is just as easy to reach as the front one. A door-mount bracket connects the carriage to the cabinet door so the motion is automatic, no reaching for a handle on the carriage itself.

Metallic Silver Finish and 53WC Series Construction

The carriage is finished in Metallic Silver with a powder coat, and the two bins are silver as well, so the hardware reads as a matched set rather than a mix of tones. The 53WC series is Rev-A-Shelf's mid-tier waste line, built around a bottom-mount bottom carriage design and a soft-close slide system rated to 90 pounds. That rating covers a genuinely full load across both bins, not just a light use scenario. The carriage depth and height are sized for a standard base cabinet, and the minimum cabinet opening specs drive the fit decision.

Where This Pullout Belongs

This unit fits well in a kitchen renovation or cabinet shop build where the client wants both bins behind one door without going to a custom pull-out. It suits a 15-inch base cabinet run where a single-bin unit leaves recycling on the floor. Designers specifying a clean, coordinated interior will find the all-silver finish easier to match than a mixed carriage and bin finish. Cabinet shops ordering in volume can pair this carriage with the separate 53WC-series door-mount bracket options to suit different door thicknesses. The minimum cabinet opening is 14-3/4 inches wide, 22-1/4 inches deep, and 19-1/4 inches tall; measure the opening against all three before ordering.

Common Questions

Hidden Sorting, Clean Silver Finish, Controlled Close

This 53WC pullout puts a two-bin sorting system behind one cabinet door and brings it forward on full-extension slides that close under control, all in a matched Metallic Silver finish.