PRO Value PRO100 10-Pair Box 24" Soft-Close Side Mount Full Extension 100 lb Ball Bearing Drawer Slide, Zinc, 0684075166961 10

Zinc Soft-Close Ball Bearing Drawer Slides Built for High-Volume Cabinet Work

The Pro Value PRO 100 is a 24 inch full-extension side-mount ball bearing drawer slide with an integrated soft-close damper, rated 100 lb per pair and finished in bright zinc. It covers the most common drawer length in residential kitchen and bath cabinetry while adding the damped, quiet close that homeowners and designers now expect as standard.

Key Features

• Integrated soft-close damper catches the drawer in the final inch of travel and settles it shut silently, without slamming.
• Full extension brings the entire drawer out to the cabinet face so the back of the drawer is fully reachable.
• 100 lb weight rating per pair handles a loaded pots-and-pans or utility drawer with room to spare.
• Bright zinc finish on cold-rolled steel provides reliable indoor corrosion protection and blends into the cabinet interior.
• Non-handed design means both slides in the pair are identical — no left/right sorting at the bench.
• 1/2 inch side clearance per side matches the standard side-mount setup so the slide drops into existing drawer box specs.

Where the 24 Inch Soft-Close Slide Earns Its Place

At 24 inches, this slide is sized for deeper kitchen drawers: full-depth base cabinet drawers, wide pot drawers, and utility drawers behind 30-inch-deep cabinetry. The soft-close damper is not an accessory added to a plain slide — it is built into the slide body, so every drawer in the run gets the same controlled close without additional components or retrofit work. For cabinet shops running production kitchens, that integration simplifies assembly and eliminates the step of pairing separate damper clips to slides.

In face-frame cabinets, the rear of the slide needs support. The PRO 100 series accommodates this with optional fixed or floating rear mounting brackets, sold separately. In frameless cabinets, the slide mounts directly to the panel on the 32mm hole pattern.

Steel and Zinc Built for Indoor Duty

The slide members are cold-rolled steel with a bright zinc electroplate — the same material and finish specification as the wider Pro Value PRO 100 family. Zinc protects the steel from the humidity and cleaning-product exposure normal in a kitchen or bath environment. This is an indoor finish: it is not rated for exterior, high-moisture, or washdown applications. The soft-close module is integrated into the slide body and tested as part of the assembly, so the damping behavior holds up consistently over the slide's service life.

The Right Fit for Residential Cabinetry and Production Shops

The PRO 100 soft-close slide is a volume product: full-extension travel, a 100 lb per pair rating, and integrated soft-close at a price point that makes it practical to spec across every drawer in a kitchen rather than reserving it for showcase drawers. It suits homeowners upgrading a single cabinet as readily as a shop running a twenty-unit kitchen, since the non-handed design and standard clearance keep ordering and installation straightforward at any quantity. Sold as a pair, one pair per drawer.

Quiet, Reliable Drawers from the First Install to the Last

A 24 inch full-extension soft-close slide with a 100 lb per pair rating and bright zinc finish covers the full range of residential kitchen and bath drawer work — and the integrated damper delivers consistent performance without extra components or extra steps.