Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Table apron drop leaf support from Selby Furniture Hardware is a spring-loaded support that holds a raised table leaf rigidly in position, so the work surface stays usable under load without unwanted movement during normal use.
This 8 inch L support is part of Selbys line of table hardware for work surfaces and tables, so it fits directly into projects that rely on apron-mounted supports to carry drop leaves alongside a fixed section.
The support is made from Prime heavy gauge steel, which provides a solid bearing surface for the moving parts and helps the mechanism resist flexing when the leaf is raised or lowered repeatedly during regular operation.
A spring-loaded action locks the support when the leaf is raised, so the leaf remains supported until the spring-tension is deliberately released, reducing the chance of accidental collapse while the extension is in service.
The built-in release ring is pulled to relieve spring-tension, which lets the user control when the leaf can be folded down, helping keep the leaf in its working position until it is intentionally stowed.
The support range covers 6, 8, 10 or 12 inch open length (rivet-to-rivet), so matching the specific open length to the leaf design helps align the support geometry with the apron layout.
This table apron drop leaf support operates as a rivet-to-rivet linkage with a defined open length of 6, 8, 10 or 12 inches, so when positioned between the apron and leaf, the geometry at full extension determines the raised leaf height relative to the fixed top.
The Prime heavy gauge steel construction gives each riveted pivot point a firm bearing, which supports the spring-loaded motion as the leaf is moved, helping the mechanism track consistently along the same arc each time it is opened or closed.
When the leaf is lifted to its open position, the internal spring engages to hold the support rigidly, translating the lifting motion into a locked support condition that carries the leaf while the table is in service.
To fold the leaf, the user pulls on the release ring to relieve the spring-tension, and this controlled release lets the mechanism transition from its rigid state to a folding state, so the leaf can drop without fighting against the locked spring.
Because the support is designed specifically as table hardware for work surfaces and tables, it integrates into apron-based constructions where the support arms sit in line with the table framing, which helps keep the hardware concealed beneath the work surface in typical layouts.
This Selby Furniture Hardware table apron drop leaf support is specified for work surfaces and tables, so it fits applications where a fixed top needs an occasional-use extension that still feels solid under load, such as utility, craft, or service tables.
The 8 inch open length variant sits within a range that also includes 6, 10 and 12 inch open lengths (rivet-to-rivet), so choosing among these lengths lets the installer coordinate each support with the depth of the individual leaf section across a multi-leaf project.
Because the support provides rigid support for raised leaves, it suits installations where the extension must carry normal tabletop items while remaining aligned with the main surface, helping the work area function as a single plane when the leaf is raised.
The spring-loaded mechanism matches table hardware needs where the leaf is moved repeatedly, since the spring action engages every time the leaf is opened, providing consistent holding behavior across cycles of daily operation on the work surface.
The Prime heavy gauge steel body of the S5578U support handles the forces created when the leaf is lifted and locked, so the pivots and arms maintain their relationship even when the leaf is carrying everyday loads at the work edge.
By being spring-loaded, the support automatically provides a holding force when the leaf reaches its open position, so the user does not rely on precise positioning to engage a catch, which streamlines motion during normal setup of the extended surface.
The fact that the support prevents closing until spring-tension is relieved by pulling on the release ring directly affects safety of the work surface, because the leaf remains braced until the deliberate pull allows it to fold.
The defined 6, 8, 10 or 12 inch open length (rivet-to-rivet) gives predictable geometry for the arm when extended, so builders can design the apron and leaf joint knowing how far the support will span once locked in its working position.
As table hardware, this drop leaf support forms part of the underlying structure that lets a compact table transform into a larger work surface, with the spring-loaded action and rigid support turning a hinged leaf into a functional extension during use.
The S5578U support is a table apron drop leaf support from Selby Furniture Hardware, so it is designed as table hardware that holds a hinged table leaf in its raised working position.
The spring-loaded table apron drop leaf support engages when the leaf is raised, providing rigid support so the leaf stays in place until the spring-tension is released using the pull ring.
Prime heavy gauge steel construction gives the drop leaf support a strong body and pivots, helping it resist flex as it carries the raised leaf during normal table use.
The release ring on the support must be pulled to relieve spring-tension, so the leaf cannot close until that action occurs, giving controlled folding of the extension.
Open length rivet-to-rivet describes the distance between the supports rivets when fully extended, which for this series is 6, 8, 10 or 12 inches to match different leaf depths.
This drop leaf support is described as table hardware for work surfaces and tables, so it is used where a hinged leaf needs firm support beside a fixed tabletop.
The Selby Furniture Hardware table apron drop leaf support in the 8 inch L size combines Prime heavy gauge steel construction with a spring-loaded, release-ring-controlled action, so it delivers rigid support for raised leaves on work surfaces and tables.
With open length options of 6, 8, 10 or 12 inches measured rivet-to-rivet, this table hardware line gives installers practical sizing choices for coordinating support span with individual leaf depth across a project.
Using this S5578U drop leaf support helps a hinged table extension function as part of the main work surface, providing a stable, controlled leaf action that matches real-world use demands on utility and service tables.
Sold In: 1 Each