table apron drop leaf support from Selby Furniture Hardware is built as table hardware that holds a raised table leaf in position, so a work surface can be extended and used without the leaf sagging under normal load. The 10 inch length identifies this support as one of the Prime heavy gauge steel, spring-loaded units listed in the open length range of 6, 8, 10 or 12 inches, which helps match the mechanism length to the radius of the leaf for smoother action. The heavy gauge steel construction forms a rigid support once the leaf is raised, so the support resists flexing during everyday use. The spring-loaded design uses internal spring tension to hold the support locked, so the raised leaf stays supported until the spring tension is deliberately released through the mechanism.
The S55710U table apron drop leaf support is defined as a spring-loaded support between a table apron and a drop leaf, so it is installed to operate along the swing path of the hinged leaf. The 10 inch open length, measured rivet-to-rivet within the 6, 8, 10 or 12 inch options, positions the pivot points to match the table geometry, so the leaf can reach full extension while the arm locks straight. The Prime heavy gauge steel body gives a rigid link once mounted, so the installer gains a solid connection that helps align the leaf with the main top when opened. The note that screws are not included signals that separate fasteners secure the support to wood members, so screw type and length are chosen to suit the specific table construction.
This Selby table apron drop leaf support is categorized under work surface and tables as table hardware, so it is suited to hinged leaves on tables or work surfaces where an apron structure meets a folding extension. The 10 inch open length, part of the 6, 8, 10 or 12 inch group given as rivet-to-rivet, allows the mechanism to serve medium-depth leaves where enough arm length is needed to reach out under the leaf. The rigid support description means that when the leaf is raised the support forms a fixed brace between the apron and the underside of the leaf, so the leaf becomes part of the usable top. Because the support is identified as table apron hardware, its geometry is intended to work from the apron region rather than from a center pedestal or other mounting point, so it fits traditional apron-and-leg style tables or similar framed work surfaces.
The description notes that these Prime heavy gauge steel supports are spring-loaded and that they provide rigid support for raised leaves, so the spring engages as the leaf is lifted until the arm reaches its open position and locks. The same description explains that, for security, the support prevents closing until spring-tension is relieved by pulling on the release ring, so the mechanism resists accidental collapse while someone is working on the extended surface. The need to pull the release ring before lowering the leaf means the user performs a deliberate action to unlock the support, so the folding sequence stays controlled during closing. The heavy gauge steel construction working with spring tension creates a firm, repeatable motion path, so installers and users get a predictable open-and-close feel each time the leaf is moved.
The table apron drop leaf support is a spring-loaded steel support that holds a raised table leaf rigidly, so the extended section can function as part of the usable work surface.
The S55710U is specified as a 10 inch open length support measured rivet-to-rivet within the 6, 8, 10 or 12 inch length group, so it suits medium-depth table leaves.
The spring-loaded mechanism uses spring tension to hold the support in its open position, so the raised leaf stays supported until the spring is released through the built-in release ring.
The Prime heavy gauge steel construction provides a rigid connection between apron and leaf, so the leaf experiences reduced flex and improved stability during regular table use.
The release ring is pulled to relieve spring tension, so the support can move out of its locked position and allow the leaf to be lowered in a controlled way.
The description identifies it as a table apron drop leaf support used in work surface and table hardware, so it is intended to mount in apron-style table constructions with hinged leaves.
This 10 inch table apron drop leaf support from Selby Furniture Hardware combines Prime heavy gauge steel construction with a spring-loaded, release-ring-operated action, so it gives rigid support for raised leaves while controlling closing. The defined 10 inch open length, listed within the 6, 8, 10 or 12 inch rivet-to-rivet range, lets projects match mechanism size to leaf depth for proper reach and stability. For work surface and table builds that rely on apron-mounted hardware to carry a hinged leaf, this S55710U support offers a clearly specified length, material, and spring-tension operation, so it can be selected as a planned structural element in the table design.
Sold In: 1 Each