Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Blum CLIP top hinge opens to 155 degrees with zero protrusion geometry, hanging full overlay doors on both face-frame and frameless cabinets with INSERTA tool-free plate mounting and a self-close spring.
A 155 degree opening changes how a cabinet works. In a kitchen island accessible from multiple sides, a pantry with deep shelves, or a corner run where clearance is tight, a standard 110 degree hinge still puts the door partially in the way. At 155 degrees, the door swings far enough to lie nearly parallel with the cabinet side, clearing the opening and letting someone reach straight in without the door edge in their path. The zero protrusion design compounds that benefit: when the door is open, the hinge arm stays within the cabinet face line rather than jutting out, which matters anywhere fingers, trays, or drawer pulls pass close by.
The 35mm cup bores into the back of the door, and the arm connects to a base plate mounted to the cabinet, sold separately. Use a matching Blum plate sized for your cabinet construction and the door position you need.
The hinge body is steel with a nickel finish. In a run of cabinets where hardware is visible during use, the nickel matches brushed or satin nickel pulls and drawer slides without requiring a finish swap. Steel construction holds the 155 degree swing under daily use without the hinge loosening over time, and the three-way adjustment keeps that range of motion working correctly: a turn of the cam screws brings a drifted door back into alignment without removing it from the cabinet.
This hinge fits standard doors in the 16 to 22mm range on frameless or face-frame boxes. It belongs wherever the full door opening matters most: deep pantry cabinets, accessible-design kitchens, appliance garages where a door sitting open needs to stay out of the workspace, and any run where a second person needs to stand beside an open cabinet without the door catching them. INSERTA mounting requires 5mm pre-drilled system holes in the cabinet side. For cabinets without those holes, the screw-on plate version of this hinge handles the same application. Because this hinge is self-close rather than soft-close, it is also a practical choice for settings where a damper mechanism adds unnecessary cost but the door still needs to close on its own.
No. The hinge arm clips to a base plate that mounts to the cabinet, and that plate is sold separately. Match a Blum plate to your cabinet type and your overlay requirements.
This hinge is self-close, not soft-close. The self-close spring pulls the door shut but does not cushion the final contact. At 155 degrees, this is the widest angle in the Blum CLIP top range that pairs with a self-close mechanism. Soft-close is available on the 155 degree version of this series in a separate SKU.
When the door is open, the hinge arm does not extend beyond the cabinet face. It stays within the plane of the door and cabinet, reducing the chance of the arm catching on a drawer front, pull, or passing hand in a busy workspace.
INSERTA mounting depends on pre-drilled 5mm holes. Without them, use the screw-on plate version of this hinge, which fastens with wood screws and covers the same application.
Specify this hinge when the job calls for a wide swing that stays out of the way, a finish that coordinates with visible hardware, and a tool-free install that keeps production moving.
Sold In: 1 Each
