
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
CompX RegulatoR electronic push button cabinet lock is a keyless, electronic push button lock designed for cabinet doors, drawers, lockers, and similar enclosures, which gives installers a single solution for multiple storage applications. The vertical mount layout with the knob at the bottom provides a clear orientation on doors and drawer fronts, so positioning the keypad and latch is straightforward during layout. A 1-3/4 inch cylinder length supports installations through thicker cabinet fronts, allowing use on a broad range of casework depths. The lock uses a 3/4 inch diameter mounting hole, so drilling is limited to one clean bore rather than a complex multi-hole pattern. The satin nickel finish provides a neutral, professional look that fits many cabinet styles in shops, offices, and locker areas.
This CompX National electronic push button cabinet lock is configured for vertical mounting with the knob at the bottom, giving a predictable orientation when laying out keypad height and handing on doors, drawers, and lockers. The 1-3/4 inch cylinder length supports mounting through relatively thick doors or drawer fronts, which is useful on commercial cabinets that use heavier materials. A 3/4 inch diameter mounting hole establishes the core interface, so installers can plan drilling using standard boring tools. Because the lock is keyless and electronic, access is managed through push button codes rather than traditional keys, which simplifies reassigning cabinets or lockers over time.
This CompX RegulatoR vertical electronic push button cabinet lock is specified for cabinet doors, drawers, lockers, and similar enclosures, so one part number can be applied across a variety of storage units in a project. The vertical configuration with the knob at the bottom gives a consistent visual orientation, which helps align the keypad neatly with door edges or drawer rails. A 1-3/4 inch cylinder length allows the body to reach through thicker fronts often found in institutional or commercial cabinetry. Because the system is keyless and electronic, each opening uses a push button interface rather than a mechanical key, which supports use in environments where multiple users access the same cabinet throughout the day.
The self-locking version uses Slam CAM, a spring-loaded latching mechanism that locks when the user pushes the door or drawer closed, which reduces steps compared to manual relocking and supports fast operation on high-traffic compartments. With 20 codes per lock available, one unit can serve many individual users or groups, allowing separate codes to be assigned while using a single installed lock. The low battery indicator provides a clear signal before power is depleted, which helps keep cabinets accessible by prompting scheduled battery replacement. A cycle life rating of 75,000 cycles per battery set means the lock is designed to support regular openings over an extended period, which is important where cabinets are accessed frequently. External access to the AAA battery compartment allows these replacements to happen from the front side of the cabinet, helping keep service work quick on built-in or tight installations. The satin nickel finish ties the keypad and knob into modern cabinet hardware, which supports consistent appearance across a run of casework.
The CompX RegulatoR electronic push button cabinet lock is specified for cabinet doors and drawers, lockers, and similar enclosures, so it can be used across many storage units in the same project.
The self-locking Slam CAM uses a spring-loaded latching mechanism that locks when the door or drawer is pushed closed, which removes the step of returning the knob to a locked position.
This CompX National electronic push button cabinet lock is a vertical mount with the knob at the bottom, which defines the orientation when laying out holes and keypad location on the cabinet.
The CompX RegulatoR REG-S-V-5 uses a 1-3/4 inch cylinder length and installs through a 3/4 inch diameter mounting hole, guiding door or drawer thickness and boring operations.
The CompX RegulatoR lock provides 20 codes per lock, allowing multiple individual or shared access codes to be set on a single cabinet or locker opening.
The CompX RegulatoR uses AAA batteries with a rated 75,000 cycles, has an externally accessible battery compartment, and provides a low battery indicator to signal when replacement is needed.
The REG-S-V-5 CompX RegulatoR electronic push button cabinet lock combines a self-locking Slam CAM mechanism, 1-3/4 inch cylinder length, and vertical mount layout, giving you a keyless option for cabinet doors, drawers, lockers, and similar enclosures. With support for 20 codes per lock, external AAA battery access, and a satin nickel finish, it aligns electronic access, serviceability, and appearance in one unit. Select this CompX National lock when a keyless, push button solution with repeatable self-locking performance fits the storage layout you are building or updating.
Sold In: 1 Each