Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Olympus DCN1 pin tumbler cam lock gives a keyed alike 101 locking solution for applications using 3/4 inch material thickness, so matching doors or panels can share the same key for straightforward access control on a project. The satin chrome 26D finish provides a clean, neutral appearance that coordinates with many commercial and institutional hardware finishes, helping installations look consistent across cabinetry. A zinc die cast body and zinc die cast pin tumbler cylinder create a sturdy cam lock construction, supporting frequent daily locking and unlocking in typical woodworking and cabinet environments. The 1 inch face is designed to cover splintering around the lock bore, allowing a drilled hole in wood or similar material to be concealed without relying on an additional trim ring during installation. This cam lock belongs to the Olympus N Series keying system, aligning it with other N Series locks for keyed together layouts.
The Olympus DCN1-26D-101 cam lock is designed for 3/4 inch material thickness, matching common cabinet door and drawer front dimensions so the cylinder length and cam reach align with typical case construction. A 1 inch face is intended to cover any splintering around the drilled hole, which helps create a cleaner finished appearance on wood substrates after boring the lock opening. The lock is supplied in satin chrome 26D, allowing it to visually coordinate with other 26D architectural hardware on the same project. Zinc die cast construction is used for both the body and the pin tumbler cylinder, supporting a solid feel in the key operation while maintaining dimensional accuracy in the cylinder components. Keying is set to keyed alike 101 within the stock KA series, allowing multiple DCN1-26D-101 locks to share the same key code for grouped access points.
The Olympus DCN1 pin tumbler cam lock is classified under cam locks within locks and latches, placing it directly in the typical hardware set for cabinet doors, drawers, and similar casework components. Its 3/4 inch material thickness specification aligns with many standard cabinet door and drawer front constructions, so the cylinder projects properly through the panel without excess play. The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, connects this lock to a broader N Series ecosystem, allowing it to be keyed together with other N Series locks in the same facility. Being keyed alike to stock KA number 101 means multiple units of this DCN1-26D-101 model can be used on separate openings while operating from a single key pattern, which is practical for banks of cabinets or coordinated millwork runs. The satin chrome 26D finish positions the lock for use in settings where 26D door hardware or hinges are used, helping the cam lock visually align with other door and cabinet components.
The DCN1 cam lock is built around a zinc die cast body and zinc die cast pin tumbler cylinder, giving a consistent housing and cylinder interface that supports smooth key rotation over time in typical woodworking environments. The lock has passed ANSI/BHMA A156.11 Grade 1 performance requirements, providing a tested benchmark for durability and operation that suits higher-use cabinetry installations. A standard function with the key removable in both locked and unlocked positions lets users remove the key after turning to either state, keeping keys out of the cylinder when not in use and reducing interference with adjacent casework or contents. The N Series keying configuration supports stock keying as KD or KA using a 4-pin standard cylinder, while masterkeyed setups use a 5-pin standard arrangement, giving locksmiths and security planners structured options when planning key hierarchies. Stock keyed alike numbers 101, 103, 107, and 915 provide defined KA groups so locks can be ordered in predictable keying sets. The N Series keyway structure also supports masterkeyed and grand masterkeyed systems, enabling this cam lock to participate in layered key control arrangements throughout a woodworking project or facility.
The Olympus DCN1 pin tumbler cam lock is specified for 3/4 inch material thickness, so its cylinder and cam are sized for typical cabinet doors and drawer fronts built from that stock.
The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, lets this lock be keyed together with other N Series locks, supporting coordinated key systems.
The Olympus DCN1 cam lock is easily rekeyable via its cylinder retainer clip, so cylinder pinning can be changed when keying plans are updated or expanded.
This cam lock has passed ANSI/BHMA A156.11 Grade 1 performance requirements, indicating it has been tested to a high performance level for cam locks in demanding use.
The cam lock supports 5-pin standard masterkeyed setups and can be used in grand masterkeyed systems, allowing it to participate in layered key control schemes.
The two reversible cams work in all positions, so the installer can orient the cam for different door swings or strike locations while using the same lock body.
The Olympus DCN1-26D-101 pin tumbler cam lock pairs 3/4 inch material thickness fit with N Series keying, making it a direct option when cabinets or casework must follow a defined key system. Its ANSI/BHMA A156.11 Grade 1 performance rating and zinc die cast construction support use in higher-traffic applications where dependable cam operation matters. The satin chrome 26D finish and 1 inch face help the lock blend into 26D hardware suites while covering the lock bore cleanly. For projects that need keyed alike 101 groupings or broader N Series masterkeyed structures, this DCN1 model provides a cam lock built for that keying layout.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  OYKB-101-NP Mfr# KB-101-NP | N Series Cut Key for Keyed Alike #101 |
