Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Olympus DCN1 pin tumbler cam lock uses a zinc die cast body and cylinder to create a compact lock solution for cabinet and panel applications where metal components are preferred. The pin tumbler cylinder structure provides a keyed locking interface that supports controlled access in woodworking or casework projects. The lock is keyed alike 915, so multiple DCN1-26D-915 units share the same key number 915, simplifying keyed access across several doors or drawers on the same jobsite. The 1 inch face on the cylinder covers splintering around the bore, helping the finished opening present a clean edge when drilled in wood or similar materials. This face design also eliminates the need for an additional trim ring, which reduces the number of separate components the installer must handle during lock installation.
This Olympus DCN1-26D-915 cam lock is specified for 3/4 inch material thickness, so the standard body length is matched to typical cabinet doors and drawer fronts built from that thickness. The 1 inch face sits on the exterior surface while the body extends through the bore, allowing the cam hardware to operate on the back side of the panel. The key removable function in both locked and unlocked positions lets installers operate and remove the key without needing a spring return, which can speed up function checks during trim-out. Since the face covers splintering around the drilled hole, the installer can rely on the lock face to mask minor chipping from boring operations.
The Olympus DCN1 pin tumbler cam lock belongs to the cam locks class, so it serves as a rotary locking point on cabinet or panel doors where a cam engages behind the frame or strike. The zinc die cast body and cylinder allow the lock to be used in typical interior woodworking environments where metal lock hardware is appropriate. Because the unit is keyed alike 915 and part of the N Series keyway family, it can be placed across multiple doors or drawers that are intended to open with the same key number, which is useful for grouped storage such as banks of cabinets. When a project calls for N Series keying equivalent to National D4291 4-pin or D4292 5-pin systems, this lock fits that profile, tying into broader key plans in shops or facilities already using those keyways.
The DCN1-26D-915 cam lock has passed ANSI/BHMA A156.11 Grade 1 performance requirements, which means the lock design has been tested to a recognized performance level for cam locks under that standard. This Grade 1 performance level supports repeatable function in demanding commercial or institutional casework where locks are cycled frequently. The standard function allows the key to be removed in both locked and unlocked positions, reducing the need to hold the key while verifying latch engagement during punch-out. Two reversible cams that work in all positions provide flexibility, so the same lock can be set up for clockwise or counterclockwise rotation and various latch engagements, which reduces rework when layout details change. Being a Woodwork Institute acknowledged product gives the lock a defined place within woodworking specifications, supporting consistent hardware selection on WI-guided projects.
The Olympus DCN1 pin tumbler cam lock is designed for 3/4 inch material thickness, so it aligns with common cabinet door and drawer front construction.
The N Series keyway, equivalent to National D4291 or D4292 systems, lets the DCN1-26D-915 integrate into projects using that key profile for consistent key control.
Keyed alike 915 means multiple DCN1-26D-915 locks share the same 915 key number, allowing one key to operate several locks on the same project.
The DCN1-26D-915 cam lock is easily rekeyable via a cylinder retainer clip, so cylinders can be reconfigured to new keying when project key plans change.
Passing ANSI/BHMA A156.11 Grade 1 performance requirements means the DCN1-26D-915 is tested to a high cam lock performance standard for demanding installations.
The 1 inch face on the DCN1-26D-915 covers splintering around the drilled hole, so minor chipping at the bore edge is concealed by the lock face.
The Olympus DCN1-26D-915 cam lock combines a zinc die cast body, N Series keyway, and keyed alike 915 configuration to support coordinated key control on woodworking projects. The 3/4 inch material fit and 1 inch face align well with standard cabinet construction, simplifying layout and boring steps. Grade 1 performance and Woodwork Institute acknowledgment position this lock for demanding casework where tested hardware is specified. For projects built around satin chrome hardware and N Series keying, this Olympus pin tumbler cam lock delivers a defined combination of material, finish, and key system for consistent results across multiple openings.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  OYKB-915-NP Mfr# KB-915-NP | N Series Cut Key for Keyed Alike #915 |
