Olympus DCN1 Pin Tumbler Cam Lock, 3/4" Material Thickness, Polished Chrome, Keyed Alike 101 - DCN1-US3-101

Olympus DCN1 Cam Lock For Secure Cabinet Use

Olympus DCN1 pin tumbler cam lock gives a keyed alike 101 solution that uses the N Series keyway, so matching it with other N Series locks creates a consistent key system across related fixtures. The lock body and pin tumbler cylinder are zinc die cast, which provides a solid metal construction that supports everyday locking and unlocking in typical woodworking applications. The standard function allows the key to be removable in either the locked or unlocked position, so users can operate doors or panels without leaving the key hanging in the lock. Two reversible cams work in all positions, which lets the installer choose the cam orientation needed for the required locking direction while using the same lock body. A 1 inch face covers splintering at the bore edge, so a separate trim ring is not required to hide minor tear-out around the hole.

Key Olympus DCN1 Cam Lock Working Advantages

• The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, allows this cam lock to operate within existing N Series key systems, simplifying key control across multiple lock points.
• The lock can be keyed together with other N Series locks, so cabinets, drawers, or panels can share the same operating key where that arrangement fits the site requirements.
• The lock is easily rekeyable via the cylinder retainer clip, allowing changes to keying without replacing the entire lock body when key control needs to be updated.
• Passing ANSI/BHMA A156.11 Grade 1 performance requirements shows that the cam lock has been tested to a recognized performance standard, giving specifiers a defined grade level for institutional or commercial projects.
• The Woodwork Institute acknowledgement indicates the product is recognized within WI guidelines, which matters where projects call out WI-acknowledged hardware in the specifications.
• The 3/4 material thickness rating matches common cabinet construction dimensions, so installers can use it in standard casework sides without additional blocking for thickness.

Installation Details For 3/4 Material Thickness Applications

This Olympus DCN1-US3-101 cam lock is designed for 3/4 inch material thickness, so it suits many cabinet and casework doors or panels built from that common dimension. The 1 inch face fully covers the drilled hole edge, allowing a clean finished appearance at the lock location while avoiding extra trim components. The two reversible cams supplied for the lock work in all positions, which means the installer can select the appropriate cam piece and rotation for vertical or horizontal applications. The zinc die cast body and cylinder create a stable housing for the cam action, supporting smooth operation once the lock is secured in the panel. The easily rekeyable design, using a cylinder retainer clip, allows service personnel to adjust keying during the life of the installation while retaining the same mounted lock case.

Using This N Series Cam Lock In Real Projects

Where The DCN1-US3-101 Cam Lock Fits Best

The Olympus DCN1-US3-101 cam lock works in 3/4 inch thick material, aligning with many cabinet doors, drawer fronts, or access panels in woodworking projects. Because it uses the N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, it integrates into lock groups that already rely on that keyway, allowing multiple locations to be opened with coordinated keys. Stock keying options include keyed alike and keyed different in 4 pin standard form, and the stock KA numbers such as 101, 103, 107, and 915 define preset groups for organizing who has access to which units. The masterkeyed 5 pin standard setup, along with grand masterkeyed availability, supports layered access structures where some keys open individual locks while others operate broader groups.

How Olympus Lock Details Support Repeatable Results

The key removable in locked or unlocked position function lets technicians remove the key after securing a door or while leaving it open, which can streamline routines where multiple compartments are serviced in sequence. Two reversible cams that work in all positions give flexibility in aligning the cam throw with the strike point, reducing the need to source other cams for left-hand, right-hand, or vertical applications. The zinc die cast construction of both body and pin tumbler cylinder maintains consistent dimensions, which supports accurate cam engagement once the mounting hole is properly sized. Passing ANSI/BHMA A156.11 Grade 1 performance requirements provides a documented level of operational durability, helping specifiers match this cam lock to environments that call for that grade. Woodwork Institute acknowledgement further ties the product to woodworking industry expectations, which can simplify hardware selection when projects reference WI-acknowledged items in their documentation.

Common Questions About This Olympus Cam Lock

Selecting The Olympus DCN1 Lock For Your Project

The Olympus DCN1-US3-101 pin tumbler cam lock combines an N Series keyway with keyed alike 101 stock keying, giving a predictable key setup for 3/4 inch material installations. Its zinc die cast body, 1 inch face, and reversible cams work together to support practical cabinet, casework, and panel locking layouts. With easy rekeying via the cylinder retainer clip, plus ANSI/BHMA A156.11 Grade 1 performance and Woodwork Institute acknowledgement, this cam lock aligns with project specifications that call for documented standards. Select this model when a coordinated N Series keyway and 3/4 inch material thickness rating fit the locking points you are building or servicing.