Olympus DCN1 Pin Tumbler Cam Lock, 3/4" Material Thickness, Polished Chrome, Keyed Alike 107 - DCN1-US3-107

Olympus DCN1 Cam Lock For 3/4 Material

Olympus DCN1 pin tumbler cam lock is a zinc die cast cam lock designed for applications using 3/4 material thickness, so it suits many cabinet and casework doors where that thickness is standard. The cylinder uses a zinc die cast pin tumbler design, providing a familiar key feel and straightforward rekeying when keying plans change on the job. This model is keyed alike 107, so every lock in the same KA 107 group works from the same key number, which simplifies key control where one key needs to operate multiple openings. The lock face has a 1 inch diameter, so it covers splintering around the bore and removes the need for an additional trim ring, which speeds drilling and clean-up on finished panels. The standard function allows the key to be removed in the locked or unlocked position, so users can leave the cylinder without a key dangling while still keeping the cam in the desired position.

Key Cam Lock Details That Support Workflow

• The zinc die cast body provides a solid housing around the cylinder, which helps the lock maintain alignment in the panel bore during repeated use.
• The zinc die cast pin tumbler cylinder gives a conventional key-and-tumbler operation, which helps installers match the lock to existing key systems using similar N Series designs.
• The lock is easily rekeyable via a cylinder retainer clip, so cylinders can be changed in the field when masterkeying or rekey work is required without replacing the full assembly.
• Two reversible cams work in all positions, so the same lock hardware can be oriented to operate with doors or panels that need clockwise or counterclockwise cam throw.
• The lock passed ANSI/BHMA A156.11 Grade 1 performance requirements, so it meets a recognized standard for cam lock performance which supports use in demanding environments.
• The product is acknowledged by the Woodwork Institute, so it aligns with woodwork industry standards where WI acknowledged products are specified on millwork projects.

Cam Lock Fit, Keying, And Rekeying Basics

This Olympus Lock, Inc. DCN1-US3-107 cam lock is built for 3/4 material thickness, so boring depth and location can be planned around that dimension when laying out cabinet or fixture fronts. The N Series keyway is equivalent to the National D4291 4-pin or D4292 5-pin system, so it can be integrated into systems already built around those keyways. Stock keying is KD/KA with a 4 pin standard configuration, so installations can use keyed different or keyed alike groups depending on security needs. Stock keyed alike numbers include 101, 103, 107, and 915, and this specific lock uses KA 107, which allows matching to other KA 107 N Series locks for shared keying.

Using This Cam Lock In Real Installations

Where This N Series Cam Lock Performs Best

The Olympus DCN1 pin tumbler cam lock uses a 1 inch face that covers splintering around the drilled hole, so it works well in finished cabinet and millwork faces where a clean appearance is important. Because the body and cylinder are both zinc die cast, the lock provides a consistent fit in standard bores commonly used in casework and fixture construction. The standard function, which allows the key to be removed in either the locked or unlocked position, supports applications where users need to leave the cam in a specific orientation without retaining the key. Two reversible cams that work in all positions allow the lock to be configured for doors or drawers that require different cam throws, which helps one lock family serve multiple cabinet layouts in a project. The lock uses the N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, so it is suited to facilities already using those systems and needing additional cam locks tied into the same key plan.

Why These Lock Details Reduce Rework

The rekeyable design, using a cylinder retainer clip, allows cylinders to be changed rather than replacing the entire lock body, which is useful when keying plans evolve during tenant changes or security updates. Masterkeyed operation is available with a 5 pin standard configuration, so larger projects can be laid out with individual keys and a master level while still staying within the same Olympus N Series family. The lock has passed ANSI/BHMA A156.11 Grade 1 performance requirements, equivalent to E07261 and E07271, which supports its use in higher traffic or more demanding cabinet applications that call for Grade 1 cam locks. Recognition by the Woodwork Institute as an acknowledged product means it fits into WI-based specifications on architectural woodwork projects. Finishes offered for this lock line are 26D, 3, 10B, and 19, so designers can coordinate the cam lock face with other visible hardware finishes used on the same casework or fixtures.

Installer Questions About Olympus DCN1 Cam Lock

Select This N Series Cam Lock For Coordinated Keying

The Olympus DCN1-US3-107 cam lock combines a zinc die cast body, N Series pin tumbler cylinder, and 3/4 material thickness design, so it aligns with common cabinet construction details. Keyed alike 107 stock keying and an easily rekeyable cylinder support evolving key plans without replacing the main hardware. Grade 1 performance and Woodwork Institute acknowledgment position this lock for demanding woodwork and casework projects that rely on recognized standards. For projects using National D4291 or D4292 based key systems, this N Series cam lock offers a way to extend that keying approach into new cabinet, fixture, and millwork locations.