Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Olympus pin tumbler cam lock gives cabinet and casework doors a keyed control point using a zinc die cast body and cylinder, which provides a solid metal housing where the cam rotates for consistent locking action. The DCN2 7/8 material thickness with 3/4 cylinder setup lets this lock serve panels built around that thickness, so shop drawings using that dimension can reference a known fit. The bright brass US3 finish presents a classic brass look on the 1 inch face, so visible hardware coordinates cleanly when used with other bright brass components. The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin system, ties this cam lock into existing N Series key systems, which matters when a project standardizes on that keyway. Keyed alike 101 stock keying allows multiple locks on the same job to operate from the same key number where that pattern is specified.
The DCN2 7/8 material thickness with 3/4 cylinder configuration is tailored for applications where the panel or door thickness is built around 7/8 inch, so the threaded cylinder length engages the hardware stack properly through that thickness. The 3/4 inch cylinder length positions the cam behind the panel at a point where it can clear cabinet framing or strike members, which helps when laying out lock centers on casework drawings. The 1 inch face sits on the exterior surface, so the lock clamps the panel between the face and the cam components, creating a stable mount when the hole is bored to the correct size. Because the cams are designed to work in all positions, this same fit can serve both vertical and horizontal orientations on cabinetry built to that thickness range.
This Olympus pin tumbler cam lock sits in the Locks and Latches, Cam Locks product class, so its role is securing doors, drawers, or panels that accept a rotating cam. The DCN2 7/8 material thickness specification makes it suitable for cabinet, fixture, or millwork panels designed around that build-up, so shop drawings can call out this part number when that thickness is present. The 1 inch face in bright brass US3 is intended to be visible on the finished surface, so it suits applications where hardware appearance matters along with keyed control. Because the standard function allows the key to be removed in both locked and unlocked positions, it works in situations where users need to leave doors open temporarily without the key hanging in the lock body.
The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin system, ties this DCN2-US3-101 cam lock into broader N Series keying plans, so facilities already using that keyway can add locks without changing key types. Stock keying options KD/KA with stock KA numbers 101, 103, 107, and 915 provide predefined keyed alike patterns, letting projects group doors under specific key numbers for zones or departments. Keyed alike 101 on this version allows multiple lock points to share the same operating key where that grouping is needed. The easily rekeyable design using a cylinder retainer clip means a locksmith or shop with the right tools can change keying without changing the entire lock body, which helps when revising key schedules after tenant changes. Masterkeyed 5 pin standard and grand masterkeyed availability let this same cam lock participate in tiered key systems, so one physical product type can support individual user keys and higher-level master keys across a facility.
The Olympus pin tumbler cam lock with DCN2 7/8 material thickness is set up for panels built around that thickness, so cabinet or fixture doors in that range can use this lock.
The 3/4 inch cylinder length positions the cam behind a 7/8 inch panel so it can rotate and engage strikes or framing, which helps when planning clearances inside cabinets.
The cam lock uses an N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin, allowing it to operate within N Series-based keying systems on a project.
The Olympus pin tumbler cam lock is easily rekeyable via a cylinder retainer clip, so key changes can be done without replacing the full lock body in the door.
Passing ANSI/BHMA A156.11 Grade 1 performance requirements means this cam lock meets a commercial performance standard, which aligns with specifications that call out that grade.
The standard function of this Olympus cam lock allows the key to be removable in both locked and unlocked positions, which helps during use and during installation checks.
The Olympus pin tumbler cam lock DCN2-US3-101 combines a zinc die cast body, 1 inch bright brass face, and DCN2 7/8 material thickness setup to fit projects using that panel build. The N Series keyway with keyed alike 101 stock keying lets this lock join larger N Series systems where grouped keying is planned. Passing ANSI/BHMA A156.11 Grade 1 performance requirements provides a defined performance reference when this lock appears in specifications. For cabinet, fixture, or millwork work that calls for a bright brass N Series cam lock in this thickness range, this model aligns directly with those requirements.
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  OYKB-101-NP Mfr# KB-101-NP | N Series Cut Key for Keyed Alike #101 |
Sold In: 1 Each
