Olympus Pin Tumbler Cam Lock For Casework Security

Olympus pin tumbler cam lock DCN2-US3-103 is a bright brass cam lock that secures doors or panels while matching common brass hardware finishes on cabinetry and fixtures. The keyed alike 103 configuration uses stock KA# 103 so multiple locks operate with the same key where consistent access control is needed across a bank of doors or drawers. The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, lets this lock align with existing N Series key systems in many commercial woodworking environments. The zinc die cast body and zinc die cast pin tumbler cylinder create a sturdy locking point in typical woodwork installations. Standard function with key removable in locked or unlocked position supports usage patterns where staff lock and unlock frequently without needing to leave the key in the cylinder. Passed ANSI/BHMA A156.11 Grade 1 performance requirements, equivalent to E07261 / E07271, supporting demanding usage cycles.

Key Cam Lock Details That Support Daily Use

• The DCN2 7/8 inch material thickness specification with 3/4 inch cylinder length targets typical cabinet and panel thicknesses, so installers can match lock reach to common woodworking constructions and maintain proper cam engagement behind the strike surface.
• Bright brass US3 finish ties the face of the lock into brass-themed projects, helping fabricators keep visible hardware consistent across multiple doors or drawers where appearance matters alongside secure function.
• N Series keyway compatible with National D4291 4-pin or D4292 5-pin systems positions this lock within established key systems, letting shops align new installations with existing N Series key control practices in commercial millwork projects.
• Stock keying with keyed alike 103 in a 4-pin standard format lets multiple DCN2-US3-103 locks share the same operating key, which simplifies access for authorized users across several locked compartments in the same installation.
• Masterkeyed in 5-pin standard and grand masterkeyed availability give locksmiths and millwork shops flexibility to build tiered key systems around this Olympus Lock, Inc. product, supporting structured access hierarchies in larger facilities.

Cam Lock Installation And Face Coverage Details

The DCN2 7/8 inch material thickness rating with a 3/4 inch cylinder helps installers match bore depth and panel thickness so the cylinder projects correctly to drive the cam. The 1 inch face dimension is designed to cover splintering around the bore, so a separate trim ring is not required where drilling leaves slightly rough edges in wood panels. Two reversible cams that work in all positions give flexibility to orient the cam for vertical or horizontal engagement depending on the cabinet layout. The zinc die cast body and cylinder form a rigid assembly once mounted through the panel, supporting stable key operation during repeated locking and unlocking.

Where This Olympus N Series Cam Lock Excels

Applications For N Series Keyed Alike 103 Lock

This Olympus Lock, Inc. DCN2-US3-103 cam lock uses N Series keying, equivalent to National D4291 4-pin or D4292 5-pin systems, so it fits projects organized around N Series key control. The keyed alike 103 configuration works well whenever a group of doors, drawers, or panels should share a single operating key, simplifying daily access for authorized staff. Stock keying in a 4-pin standard format supports straightforward integration into N Series-based installations built around common 4-pin cylinders. Passing ANSI/BHMA A156.11 Grade 1 performance requirements, equivalent to E07261 / E07271, positions this cam lock for high-use commercial environments that demand consistent functional performance from hardware attached to cabinetry or casework. Bright brass finish US3 allows this lock to integrate visually into brass-accented millwork, so security hardware follows the design language of the project.

Details That Support Repeatable Rekeying And Setup

The rekeyable cylinder, accessed via a cylinder retainer clip, lets locksmiths or shop technicians change keying on the DCN2-US3-103 without replacing the entire lock body, which can reduce labor when reworking key systems in the field. Masterkeyed 5-pin standard capability and optional grand masterkeyed structures allow this Olympus N Series cam lock to participate in multi-level key systems, so facility managers can balance individual compartment security with supervisor-level access. Two reversible cams that work in all positions support flexible layout decisions because the same lock body can drive different cam orientations without changing the base product. The 1 inch face design that covers splintering eliminates reliance on a separate trim ring, which streamlines boring operations and lets installers drill a functional hole without secondary finishing hardware. The zinc die cast body and pin tumbler cylinder provide a solid feel during key rotation, supporting smooth operation across repeated cycles in everyday commercial use.

Common Questions About DCN2-US3-103 Cam Lock Use

Select This Cam Lock For N Series Installations

The Olympus DCN2-US3-103 bright brass pin tumbler cam lock combines N Series keyway, keyed alike 103 stock keying, and Grade 1 performance for demanding cabinet and casework projects. The DCN2 7/8 inch material thickness specification with 3/4 inch cylinder, reversible cams that work in all positions, and rekeyable cylinder via retainer clip support efficient setup and later key system changes. For projects built around N Series key control and brass-finished hardware, this Olympus Lock, Inc. cam lock offers a coordinated security component ready to integrate into commercial woodworking installations.