Olympus Pin Tumbler Cam Lock, DCN2 7/8" Material Thickness with 3/4" Cylinder, Oil Rubben Bronze, Keyed Alike - 101

Olympus Pin Tumbler Cam Lock For Secure Cabinets

Olympus pin tumbler cam lock DCN2-10B-101 uses a zinc die cast body and zinc die cast pin tumbler cylinder, providing a solid metal locking point that suits typical cabinet and fixture construction where a compact cam lock is preferred. The lock is designed for 7/8 inch material thickness with a 3/4 inch cylinder, so it fits panels in that range without excess projection, supporting clean casework layouts. Its oil rubbed bronze 10B finish presents a darker face option that can match bronze-toned hardware runs on cabinetry and fixtures. The standard function allows the key to be removable in both locked and unlocked positions, which supports workflows where keys are not left hanging during service. Two reversible cams work in all positions, so the same lock body can drive different latch directions as needed in the layout.

Key Functional Details For Daily Lock Use

• The zinc die cast body and cylinder form a durable locking core, giving a consistent cam motion that suits repeated opening cycles in typical commercial or shop environments.
• The 7/8 inch material thickness specification with 3/4 inch cylinder length provides a defined fit target, helping align boring and hardware position when planning casework or fixture panels.
• The oil rubbed bronze 10B finish supplies a dark face appearance, integrating visually with bronze-finished pulls and hinges on coordinated cabinet or millwork projects.
• The pin tumbler cylinder with N Series keyway equivalent to National D4291 4-pin or D4292 5-pin supports integration with existing N Series key systems where that layout is already in use.
• The lock passes ANSI/BHMA A156.11 Grade 1 performance requirements, giving a tested performance reference for projects that call out those standards or Woodwork Institute acknowledged products.

Installation And Face Detail For Cabinet Fit

The Olympus pin tumbler cam lock DCN2-10B-101 uses a 1 inch face that covers splintering around the bore, which can reduce extra finishing steps on wood or laminate panels after drilling. With its 7/8 inch material thickness design and 3/4 inch cylinder, boring depth and back clearance can be laid out around those fixed dimensions, helping align door or drawer fronts in repetitive cabinet runs. The face requires no additional trim ring, simplifying the hole preparation to a single bore size rather than multiple counterbores. Standard function with key removable in locked or unlocked position lets installers position doors, then withdraw the key without altering the lock state, which is practical during final adjustments and handover.

Where This DCN2-10B-101 Cam Lock Works Best

Oil Rubbed Bronze Cam Lock For N Series Systems

This Olympus pin tumbler cam lock is keyed on the N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, so it can participate in keyed alike or masterkeyed schemes based on that layout. Stock keying supports keyed different and keyed alike in a 4-pin standard configuration, with stock keyed alike numbers 101, 103, 107, and 915, giving project planners defined groups for organizing lock runs. The specific DCN2-10B-101 version is keyed alike on the 101 stock KA number, which helps assign this model anywhere a single operating key number 101 is required. Masterkeyed configurations use a 5-pin standard, and grand masterkeyed setups are available, supporting tiered key control where multiple user levels are planned across casework.

Rekeyable Design And Cams For Versatile Layouts

The rekeyable design uses a cylinder retainer clip, so the cylinder can be changed for future keying changes without replacing the entire lock body, which supports long-term key control strategies on built-in cabinetry. Two reversible cams work in all positions, allowing the cam to be set to push or pull against strikes in various orientations, which simplifies using the same lock type on both left-hand and right-hand doors or on drawers. The standard function with key removable in locked or unlocked position allows users to remove the key after locking or while the lock is open, which is useful in settings where keys travel with personnel rather than staying at each opening. Passing ANSI/BHMA A156.11 Grade 1 performance requirements and Woodwork Institute acknowledgment provide reference points for specifying this lock in commercial woodworking or institutional projects that track those standards.

Common DCN2-10B-101 Olympus Cam Lock Questions

Select This Cam Lock For N Series Projects

The Olympus pin tumbler cam lock DCN2-10B-101 combines a zinc die cast body, 7/8 inch material thickness design, and 3/4 inch cylinder to support standard cabinet construction. The oil rubbed bronze 10B face and 1 inch diameter help align both appearance and bore coverage on visible casework fronts. N Series keying, with this version keyed alike 101, aligns it with projects using that key system in keyed alike or masterkeyed plans. For work that references ANSI/BHMA A156.11 Grade 1 and Woodwork Institute acknowledged products, these documented attributes support using this cam lock in specified woodworking and fixture installations.