Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Olympus Lock pin tumbler cam lock DCN3-US3-107 is a DCN-Series cam lock with a 1-7/16 inch cylinder, so it suits installations that need a longer cylinder reach through cabinet or fixture panels. The lock uses a pin tumbler cylinder in a zinc die cast body, which provides a consistent cylinder feel while keeping the lock body construction uniform for repeatable casework layouts. This model is keyed alike 107 within the N Series system, which streamlines key control when several lock points must share the same key pattern across a project. The N Series keyway matches the National D4291 4-pin or D4292 5-pin system, keeping it aligned with that established keyway profile. A polished brass US3 finish on the face presents a bright brass appearance, which suits projects calling for that specific brass color on visible hardware.
The 1 inch face on the DCN3-US3-107 extends across the mounting hole, so it covers splintering around the bore and removes the need for any extra trim ring at the face. This reduces layout steps because the installer drills the lock hole to size and lets the face shoulder handle visual cleanup at the panel surface. The zinc die cast body and cylinder keep the main dimensions fixed from lock to lock, which helps jigs and boring patterns stay consistent over multiple cabinet runs. Two reversible cams that function in all positions support vertical or horizontal orientations, so the installer matches cam throw to the hardware layout without changing the underlying cylinder. The lock has passed ANSI/BHMA A156.11 Grade 1 performance requirements, aligning its operation with that level of cam lock test performance for woodwork applications.
This Olympus Lock DCN-Series model uses the N Series keyway, equivalent to the National D4291 4-pin or D4292 5-pin system, so it fits projects that are already keyed on that profile. The 1-7/16 inch cylinder length gives reach for thicker cabinet or fixture fronts where a shorter cylinder would not project through as effectively. Its ANSI/BHMA A156.11 Grade 1 performance test result means the lock has been evaluated to that cam lock standard, which suits higher-use woodwork installations needing that performance level. Woodwork Institute acknowledgment ties this cam lock to recognized woodwork standards, which matters when a specification references WI acknowledged products on millwork or casework schedules.
The rekeyable design, using a cylinder retainer clip, lets the same DCN3-US3-107 housing stay in place when keying changes, which helps shops keep door prep and hardware footprints stable over time. Keyed alike 107 stock keying within the N Series means multiple DCN-Series lock points can share the 107 key code, which simplifies user key management across banks of drawers or doors. Stock keying built around 4-pin standard cylinders and 5-pin masterkeying capability gives room for masterkeyed and grand masterkeyed systems within the same cam lock family, which is useful on tiered access projects. Two reversible cams that work in all positions allow the same lock body to serve various latch directions and strikes, reducing part variation while preserving proper cam engagement on each opening.
The DCN3-US3-107 cam lock uses the N Series keyway, equivalent to the National D4291 4-pin or D4292 5-pin key system, which links it to that established key profile.
The keyed alike 107 setup lets multiple locks share the same 107 key pattern, which simplifies key control when several doors or drawers use this N Series cam lock family.
The Olympus DCN3-US3-107 cam lock is easily rekeyable via a cylinder retainer clip, allowing key changes while keeping the same lock body and door preparation.
The ANSI BHMA A156.11 Grade 1 result indicates this cam lock has passed that Grade 1 cam lock performance standard, which is relevant for demanding woodwork applications.
The Olympus DCN3-US3-107 cam lock has a standard function with key removable in either locked or unlocked position, which supports different operating routines at the opening.
The 1 inch face covers splintering around the bore and eliminates the need for an extra trim ring, creating a cleaner finished look at the cabinet or fixture surface.
The Olympus Lock DCN3-US3-107 pin tumbler cam lock ties N Series keying, keyed alike 107 options, and ANSI/BHMA A156.11 Grade 1 performance into one cylinder format, which suits coordinated casework and fixture runs. Its 1-7/16 inch cylinder length, 1 inch face coverage, and reversible cams support flexible layouts across doors and drawers sharing the same key system. For woodwork projects built around N Series keyways and polished brass faces, this cam lock aligns security function, cylinder reach, and visual finish in a single part number.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  OYKB-107-NP Mfr# KB-107-NP | N Series Cut Key for Keyed Alike #107 |
