Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Olympus Lock pin tumbler cam lock DCN3-US3-915 provides a DCN-Series 1-7/16 inch cylinder with keyed alike 915 configuration, so multiple lock points can share one key pattern on cabinets or enclosures where unified access is needed. The polished brass finish labeled US3 presents a bright brass face, giving casework and fixtures a finished look that matches other brass-finished hardware in a run. The body and cylinder are zinc die cast, pin tumbler construction, so the lock delivers metal-on-metal engagement at the cam while keeping parts consistent for standard keying and rekeying routines. The standard function keeps the key removable in either the locked or unlocked position, which allows installers to remove keys during layout checks or service without having to reset the lock each time. Two reversible cams work in all positions, letting the same lock handle different cam throw directions and mounting positions in a project.
The DCN-Series 1-7/16 inch cylinder length gives the installer a known dimension to match with door or drawer thickness when laying out lock locations in wood or panel constructions. The standard function with key removable in both locked and unlocked positions supports quick cycling during installation, because the lock can be tested in either state without leaving the key captive. The 1 inch face that covers splintering helps when drilling from either side of a panel, as the lock face masks small breakout at the edge of the hole. Zinc die cast body and cylinder keep the lock components uniform in size, which simplifies boring templates and helps repeated installations across multiple cabinets stay consistent. The rekeyable design via the cylinder retainer clip allows changes to keying layouts after installation while leaving the core mounting geometry unchanged in the door or drawer front.
The Olympus Lock DCN3-US3-915 operates as a cam lock where two reversible cams work in all positions, so the same lock body can turn a straight or offset cam to secure doors, drawers, or panels that sit flush or offset from the case. The 1 inch face that covers splintering means a shop can drill standard-size holes through wood, particleboard, or similar materials and rely on the lock face to cover minor chipping, which is useful when cuts are made on site. The zinc die cast body and zinc die cast pin tumbler cylinder give the lock a solid metal housing at the bore, so the cam action stays aligned with the strike or frame over repeated cycles. The polished brass finish US3 presents a bright brass appearance, letting the lock visually coordinate with brass hinges, pulls, or other trim on cabinets or fixtures. The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, gives locksmiths and millwork shops a familiar key platform when integrating this lock into broader key systems.
The stock keying format as KD/KA with 4 pin standard and stock KA numbers 101, 103, 107, and 915 allows planners to assign doors or drawers to keyed alike groups or keyed different groups while keeping the same lock body style across a project. Masterkeyed as 5 pin standard with grand masterkeyed availability means a higher-level key can operate multiple locks, supporting layered access where individual users keep their own keys while supervisors carry a master key that works across several stations. The lock passed ANSI/BHMA A156.11 Grade 1 performance requirements, equivalent to E07261 and E07271, so facility managers can align this cam lock with Grade 1 expectations in cabinet and furniture applications. Woodwork Institute acknowledgment signifies the lock is recognized in woodworking contexts, which helps casework shops design around a known product line for repeat projects. Rekeyable construction using the cylinder retainer clip lets security changes follow occupancy changes, while the cams that work in all positions support reuse of the same part number in multiple cabinet configurations.
The DCN3-US3-915 uses a DCN-Series 1-7/16 inch cylinder, which helps installers match the lock to typical cabinet and drawer front thicknesses in woodworking and similar panel applications.
The N Series keyway, equivalent to National D4291 or D4292 systems, lets this cam lock tie into existing N Series key systems so keys can be coordinated across multiple locks.
The Olympus Lock pin tumbler cam lock is rekeyable via a cylinder retainer clip, so key combinations can be changed while keeping the installed lock body in the cabinet.
Keyed alike 915 means locks set to KA 915 share one key pattern, allowing a single key to operate all locks in that keyed alike 915 group on cabinets or fixtures.
The Olympus cam lock passed ANSI/BHMA A156.11 Grade 1 performance requirements, equivalent to E07261 and E07271, aligning it with high-performance expectations for cam locks in demanding use.
The standard function with key removable locked or unlocked lets installers test lock operation or align hardware with the key removed, which keeps hands free during cabinet adjustments.
The Olympus Lock DCN3-US3-915 ties a DCN-Series 1-7/16 inch cylinder, N Series keyway, and keyed alike 915 option into one polished brass cam lock, so cabinets, fixtures, and storage can share a consistent key platform. Rekeyable construction with a cylinder retainer clip supports future key changes without altering the cabinet bore, while ANSI/BHMA A156.11 Grade 1 performance and Woodwork Institute acknowledgment position it for serious woodworking and casework projects. For projects that need coordinated N Series keying, reversible cams that work in all positions, and a 1 inch face that covers panel splintering, this Olympus Lock cam lock offers a focused solution ready for integration into your next layout.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  OYKB-915-NP Mfr# KB-915-NP | N Series Cut Key for Keyed Alike #915 |
