Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Olympus pin tumbler cam lock DCN3-10B-101 provides a cam-style locking point that secures cabinet doors or panels by turning the cylinder, giving a positive lock where a compact cam action is needed. The DCN3 1-7/16 inch cylinder length reaches through typical cabinet material to drive the cam, so the lock can engage strike points or cutouts effectively. The oil rubbed bronze 10B finish gives the exposed face a dark, finished appearance that blends with oil rubbed bronze hardware lines. The body and cylinder use zinc die cast construction, creating a rigid housing that supports the pin tumbler mechanism in normal woodworking environments. The N Series keyway matches the National D4291 4-pin or D4292 5-pin system, so existing N Series keying systems can operate this cam lock in keyed alike or masterkeyed setups.
The DCN3 1-7/16 inch cylinder length gives this cam lock reach through thicker cabinet materials, helping the cam engage properly behind doors or panels. The 1 inch face diameter covers splintering around the cylinder hole, which allows larger drilling tolerances in wood or laminated panels without needing a separate trim ring. Two reversible cams operate in all positions, so the installer can set the cam throw direction to match vertical or horizontal cabinet designs. The key is removable in both locked and unlocked positions, allowing key withdrawal after cycling the cam to the required state. An anti-rotation plate and a lost-motion cam shifter support stable mounting and controlled cam movement, helping the cylinder stay aligned while the cam picks up or releases the strike area in service.
The Olympus Lock, Inc. DCN3-10B-101 cam lock belongs to the Locks and Latches cam lock class, so it is suited to cabinet doors, drawers, and similar casework that use a rotating cam to secure the closure. The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, lets this lock blend into projects already specified with N Series cylinders, giving continuity across file cabinets, storage units, and custom millwork. Its ANSI/BHMA A156.11 Grade 1 performance rating shows this model has passed Grade 1 performance requirements, aligning it with demanding commercial and institutional cabinet applications where locks see frequent operation. Woodwork Institute acknowledgment identifies it as a recognized choice for woodwork projects, which ties directly to trade-focused millwork jobs. The oil rubbed bronze 10B finish helps this lock integrate with darker decorative hardware, making it suitable wherever cabinet appearance and secure function must work together.
The pin tumbler cylinder design gives this Olympus pin tumbler cam lock a keyed mechanism that installers and maintenance staff already understand, which simplifies servicing when keying needs to be changed under N Series systems. Rekeyability via the cylinder retainer clip lets a locksmith or maintenance technician adjust keying without disturbing the cabinet structure, reducing disruption when access levels are updated. The 1 inch face that covers splintering around the mounting hole provides forgiveness during drilling or boring, because small breakout remains hidden once the lock is seated, supporting clean-looking installations. Two reversible cams that work in all positions give flexibility to orient the cam for right-hand, left-hand, or vertical action, so a single part number can match varying cabinet layouts. Meeting ANSI/BHMA A156.11 Grade 1 performance requirements means this cam lock is built for higher cycle use common in busy storage areas, reducing the need for premature replacement on active casework. The combination of zinc die cast body, zinc die cast pin tumbler cylinder, and anti-rotation plate keeps the cylinder stable in the door or panel, helping the cam pick up strikes consistently over the life of the installation.
The DCN3 1-7/16 inch cylinder length indicates how far the cylinder projects through cabinet material, helping the cam reach behind doors or panels so the lock can engage strikes or frames reliably.
The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, allows this lock to operate with keys cut to N Series patterns where matching key systems are already in place.
The cam lock has passed ANSI/BHMA A156.11 Grade 1 performance requirements, indicating it is tested to a high performance level suitable for demanding cabinet and casework applications.
This rekeyable pin tumbler cam lock uses a cylinder retainer clip, allowing the cylinder to be rekeyed to different N Series combinations when keying plans or access levels change.
Key removable in locked or unlocked position lets users withdraw the key after setting the cam, which supports workflows where keys are removed once cabinets are either secured or opened.
Two reversible cams that work in all positions let the installer choose cam orientation and throw direction, so the same lock model adapts to different cabinet handings and latch layouts.
The Olympus pin tumbler cam lock DCN3-10B-101 combines an N Series keyway, rekeyable pin tumbler cylinder, and ANSI/BHMA A156.11 Grade 1 performance, giving cabinet projects a tested cam lock that aligns with existing N Series key systems. The oil rubbed bronze 10B finish and 1 inch face support clean, coordinated cabinet fronts, while the DCN3 1-7/16 inch cylinder and reversible cams help the lock fit a range of casework designs. For projects using Olympus Lock, Inc. hardware and N Series keying, this cam lock provides a practical way to extend that system across additional cabinet doors and drawers.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  OYKB-101-NP Mfr# KB-101-NP | N Series Cut Key for Keyed Alike #101 |
