Olympus Pin Tumbler Cam Lock, DCN3 1-7/16" Cylinder Keyed Alike 915, Oil Rubbed Bronze DCN3-10B-915

Olympus Pin Tumbler Cam Lock For Cabinets

Olympus pin tumbler cam lock gives cabinet builders and casework shops a DCN3 1-7/16 inch cylinder solution that secures doors or panels while matching existing Olympus Lock, Inc. hardware. The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, lets you keep key systems consistent across multiple locks in the same project. The lock body and cylinder are zinc die cast, which provides a solid metal housing that stands up to repeated daily operation in typical woodworking environments. Standard function with the key removable in locked or unlocked position supports applications where users carry the key away after securing or leave it in place for shared access. The 1 inch face is designed to cover splintering around the bore, reducing the need for extra clean-up work on panel edges.

Cam Lock Details That Support Daily Use

• The DCN3 1-7/16 inch cylinder length gives extra reach through thicker cabinet or casework panels, helping the cam engage properly on production furniture and millwork.
• Oil rubbed bronze finish (10B) offers a dark architectural appearance that aligns with other 10B hardware on the job, helping maintain a coordinated look across doors and drawer fronts.
• Two reversible cams that work in all positions allow the same lock body to serve different door swing or latching layouts, which helps reduce part numbers on the truck and simplify planning.
• The 1 inch face that covers splintering lets the cylinder trim hide minor chipping at the hole, which is useful when boring into veneered or laminated cabinet fronts.
• Key removable in locked or unlocked position supports applications such as shared cabinets or service panels where the key may stay in place or travel with staff during the workday.

Installation And Fit Characteristics For This Lock

The DCN3 1-7/16 inch cylinder format is designed for situations where standard shorter cylinders may not project far enough through the material, so the cam can reach the frame or strike behind the door. The 1 inch face diameter helps center the lock in the bore and hides edge tear-out, which is valuable when machining finished cabinet fronts. Zinc die cast construction for both body and cylinder results in a rigid assembly that holds alignment between the cylinder and cam during operation. The standard function that allows key removal in either locked or unlocked positions gives flexibility when laying out user access patterns in millwork, from private storage to shared workstations.

Where This Cam Lock Fits In Shop Workflows

Using The Olympus Cam Lock In Cabinet Projects

The Olympus pin tumbler cam lock in the DCN3 1-7/16 inch size suits cabinetry or casework where panels require a longer cylinder to reach through the door and still operate cams effectively. The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, means it can be keyed together with other N Series locks, allowing banks of doors or drawers to operate on a common key when a project calls for keyed alike 915 setups. Stock keying as KD/KA in 4-pin standard form supports either different keys per opening or groups of locks on the same key, which helps align security layouts with room or department usage. The 1 inch face that covers splintering is particularly useful on shop-finished or field-bored fronts, because it lets the installer rely on the lock trim to clean up the visible edge around the cylinder hole.

Details That Matter For Reliable Lock Operation

The zinc die cast body and cylinder create a stable housing for the pin tumbler mechanism, which supports smooth key turning over repeated cycles in commercial or institutional millwork. The lock passed ANSI/BHMA A156.11 Grade 1 performance requirements, equivalent to E07261 and E07271, so it meets a recognized benchmark that specifiers use when selecting hardware for demanding applications. Its rekeyable design, using a cylinder retainer clip, lets locksmiths or shop technicians change keying on the same lock body when a keying plan changes, improving flexibility over the life of the installation. Two reversible cams that work in all positions allow different cam orientations for vertical or horizontal doors, helping the same core part adapt to multiple cabinet layouts. The N Series keyway can be masterkeyed at 5-pin standard and also grand masterkeyed, which supports layered key control where some users need access to multiple groups of compartments.

Common Questions About This Olympus Cam Lock

Select This Cam Lock For N Series Projects

This Olympus pin tumbler cam lock with DCN3 1-7/16 inch cylinder, N Series keyway, and oil rubbed bronze 10B finish supports cabinet projects that demand coordinated keying and an architectural appearance. The ANSI/BHMA A156.11 Grade 1 performance rating, zinc die cast body and cylinder, and reversible cams give installers a versatile option for varied doors and panels. When the job calls for keyed alike 915 setups within an N Series system, this cam lock provides a compatible, rekeyable component that fits into existing security layouts on casework and millwork.