Trim ring for 7/8 diameter cabinet lock describes an Olympus Lock, Inc. brass trim bezel designed for standard 7/8 inch diameter cabinet locks. This ring sits around the lock body to cover chips or gouges in the laminate or wood hole that would otherwise remain visible at the cabinet face. By masking those rough edges, the trim ring presents a cleaner, more finished look at the lock opening on doors or drawers. The oil rubbed bronze finish matches oil rubbed bronze lock bodies and cabinet hardware, so the installation reads as one coordinated assembly rather than a bare drilled hole. Because it is part of the Locks and Latches lock accessories family, it is sized and shaped to support typical cabinet lock installations rather than acting as a general-purpose washer.
The trim ring is engineered around 7/8 inch diameter cabinet locks, so its internal opening suits standard 7/8 inch lock bodies without an oversized gap. When the lock is mounted through laminate or wood, the ring covers any minor chipping or gouging at the edge of the drilled opening, hiding those flaws behind a defined brass edge. Because the product class is trim bezels, the outer profile is meant to sit tight against the cabinet surface, creating a clear boundary between the lock cylinder and the door or drawer face. The oil rubbed bronze finish ties the bezel visually to matching Olympus locks and oil rubbed bronze cabinet hardware, supporting consistent color across an entire run of casework.
This Olympus Lock, Inc. trim ring is intended for use with 7/8 inch diameter cabinet locks, so it fits lock bodies in that size class across typical cabinet doors and drawers. The Web Description notes use with Olympus lock series 100, 200, N078, 999, 998, 500, 600, R078, 997, 996, and L20V, which ties the ring directly to those lock families during layout. In practice, that means a shop using those Olympus locks can specify this single trim ring to keep the lock front presentation consistent across different cabinet runs. The brass material gives the ring a solid metal interface around the cylinder, matching the metal lock body rather than introducing a dissimilar surface at the drilled hole edge.
The trim ring covers chips or gouges in the laminate or wood hole that can be seen from the outside of the cabinet, so slight breakout at the drill edge does not appear in the finished installation. That function is especially useful on laminate, where chipping at the lock hole perimeter would otherwise stand out against the decorative surface. By masking those imperfections with a brass bezel, the installer can rely on a predictable finished look even when field drilling through different materials. The ring is used primarily to enhance the appearance of the overall lock installations, so each door or drawer shows a defined metal boundary around the lock cylinder rather than raw substrate. Because it is oil rubbed bronze, the visible ring aligns with oil rubbed bronze lock faces and surrounding hardware, supporting a coordinated visual line along banks of cabinetry.
The trim ring is specified for 7/8 inch diameter cabinet locks, so it matches lock bodies designed for a 7/8 inch drilled hole in cabinet doors or drawers.
The trim ring is listed for use with Olympus series 100, 200, N078, 999, 998, 500, 600, R078, 997, 996, and L20V, aligning its fit with those cabinet lock families.
The trim ring covers chips or gouges at the laminate or wood hole, so the cabinet face shows a clean metal border around the lock instead of exposed damage.
The TR1256-10B trim bezel is made from brass, giving a solid metal interface around the lock cylinder that visually matches typical cabinet lock bodies.
The oil rubbed bronze finish lets the trim ring visually align with oil rubbed bronze locks and cabinet hardware, keeping the lock area consistent with the overall design.
The trim bezel functions as a finish ring around the lock, covering rough hole edges and enhancing the appearance of the overall cabinet lock installation.
The Olympus Lock, Inc. TR1256-10B brass trim ring gives 7/8 inch diameter cabinet lock installations a defined, oil rubbed bronze bezel that covers laminate or wood chipping at the drilled hole. For projects using Olympus 100, 200, N078, 999, 998, 500, 600, R078, 997, 996, or L20V series locks, this trim bezel supports a coordinated cabinet face appearance around every cylinder. Selecting this ring from Wurth Baer Supply aligns the lock opening, finish, and visible perimeter in a single part choice.
Sold In: 1 Each