
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Trim ring for 1-1/8 diameter cabinet lock describes a brass bezel that finishes the visible face of a cabinet lock installation. The Olympus Lock, Inc. trim ring is designed to sit around a 1-1/8 inch diameter cabinet lock, so it visually frames the cylinder on the exterior side of the door or drawer front. The oil rubbed bronze finish gives the brass trim ring a dark bronze appearance, which helps coordinate with cabinets and surrounding hardware that use similar tones. Because the product is categorized as a trim bezel for locks and latches, it functions as a finishing component around the lock body rather than as a locking device itself. The trim ring format lets installers add a defined, finished border around the lock opening on laminate or wood faces during cabinet construction or lock retrofit work.
The fit detail that this trim ring is for 1-1/8 diameter cabinet locks defines how it relates to common lock bodies used in cabinetry, since the ring needs to align with that cylinder size on the door or drawer face. Because the web description specifies use on laminate or wood holes, the bezel suits typical cabinet construction materials, letting installers finish drilled lock openings in both laminate counters and wood casework. The oil rubbed bronze finish over the brass material helps the visible trim around the lock match dark bronze cabinet hardware, which supports consistent finish choices on projects using that color family. As a trim bezel in the lock accessories category, the ring sits at the interface between the lock cylinder and the cabinet surface, shaping how the installation looks when viewed from the exterior side.
The web description that trim rings are used primarily to enhance the appearance of the overall lock installation highlights this product as a visual finishing step after the cabinet lock is positioned in the hole. The brass construction gives a metal base that supports the oil rubbed bronze finish, which lets the installer align the trim tone with other bronze-colored cabinet components while relying on a brass substrate. Because the trim ring covers chips or gouges in the laminate or wood hole, it helps cabinets present a clean, round perimeter even when the drilled opening has slight defects at the edge. This matters on visible doors and drawer fronts where the cabinet lock sits at eye level and the surrounding material needs a uniform, finished frame.
The specific fit callout for 1-1/8 diameter cabinet locks means the Olympus Lock, Inc. trim bezel is proportioned for that lock size, helping the ring center around the cylinder and present an even reveal from all sides. The description to use with models 700, 800, 850, 950, 721, 725, 754, 854, 777, 888, 931, L72, L78, and L92 indicates intended pairing with that family of Olympus cabinet locks, so the bezel and those cylinders are dimensionally matched for coordinated installations. Since the product is identified as manufacturer part number TR78-10B, installers can match this specific trim ring to drawings and lock schedules that reference that part, reducing confusion when ordering consistent finishes for multiple cabinet locations. The classification under trim bezels in lock accessories reinforces that its role is to refine the visible perimeter of these listed locks on finished cabinet faces.
The trim ring for 1-1/8 diameter cabinet lock fits locks with a 1-1/8 inch body, so it frames that cylinder size and aligns with the drilled opening on the cabinet face.
The Olympus Lock, Inc. TR78-10B trim bezel is made from brass with an oil rubbed bronze finish, giving a brass base under a dark bronze appearance at the lock face.
The trim rings cover chips or gouges in the laminate or wood hole and enhance the appearance of the overall lock installation by providing a clean, framed perimeter around the lock.
The trim ring is used on the outside of the cabinet around the 1-1/8 inch diameter cabinet lock hole, so it finishes the visible side of the door or drawer front.
The trim ring can be used with Olympus locks 700, 800, 850, 950, 721, 725, 754, 854, 777, 888, 931, L72, L78, and L92, aligning the bezel with those lock bodies.
The classification as a trim bezel under lock accessories indicates this part is intended as decorative trim around the lock, shaping how the lock edge looks on the cabinet surface.
The Olympus Lock, Inc. TR78-10B trim ring for 1-1/8 diameter cabinet lock uses a brass body with an oil rubbed bronze finish to frame the cylinder on laminate or wood cabinet surfaces. By covering chips or gouges in the lock hole and enhancing the appearance of the overall lock installation, it supports clean, consistent finishes on doors and drawer fronts. When projects call for 1-1/8 inch cabinet locks, matching this trim bezel to the specified Olympus lock series helps produce a coordinated lock face presentation across the run of cabinets.
Sold In: 1 Each