The trim ring for 1-1/8 diameter cabinet lock from Olympus Lock, Inc. is a brass trim bezel in a satin chrome finish that surrounds the lock hole, so it visually cleans up the face of the cabinet around the lock body. The product is designed specifically for cabinets using 1-1/8 inch diameter cabinet locks, so the ring matches the hole size and sits properly around the lock cylinder. The satin chrome finish on the brass material gives the lock area a consistent color and sheen, which helps the lock installation blend with other satin chrome hardware on the job. As a trim bezel classified under lock accessories, this part is intended to work with the lock, not replace it, so installers can address edge damage around the boring without changing lock function.
This trim ring is built to fit 1-1/8 inch diameter cabinet locks, so the internal opening aligns with a standard 1-1/8 inch lock body often bored in cabinet doors or drawers. Olympus Lock specifies this part for use around the lock hole, which means the installer positions the ring at the visible cabinet face before or during lock installation so the ring borders the lock cylinder. Because the product is a trim bezel rather than a latch component, it does not change the lock bolt or cam action; instead it frames the lock, helping the finished opening around the cylinder look even and properly sized on laminate or wood fronts.
The trim ring is listed for 1-1/8 inch diameter cabinet locks, so it belongs on cabinet doors or drawers bored for that lock size. Olympus Lock notes that trim rings cover chips or gouges in the laminate or wood hole visible from the outside of the cabinet, so the ring directly addresses cosmetic flaws around the boring on laminate-faced or painted wood fronts. The part is described as being used primarily to enhance the appearance of the overall lock installation, so it serves in applications where the cabinet face is exposed to view and the quality of the lock cutout matters. The manufacturer indicates use with Olympus Lock series 700, 800, 850, 950, 721, 725, 754, 854, 777, 888, 931, L72, L78, and L92, so it suits projects already using those specific cabinet lock families.
The brass construction of this trim bezel gives the ring a rigid edge at the lock opening, which helps it sit flat against the laminate or wood surface while resisting deformation at the door or drawer face during normal operation. The satin chrome finish on the brass means the visible surface reads as satin chrome, so when paired with satin chrome Olympus cabinet locks, the assembly presents a continuous satin chrome look around the keyhole and cylinder. Because the trim ring is sized for 1-1/8 inch diameter cabinet locks, it aligns closely with the bored hole and the lock housing, helping minimize any visible gap that might distract from the finished casework. The stated role of covering chips or gouges around the laminate or wood hole means the installer can bore or reuse an opening that has minor edge damage while still delivering a clean, finished appearance at the lock location. Olympus Lock positioning of this part under lock accessories and trim bezels signals that it is designed to complement the listed Olympus series locks, so a shop standardizing on those models can keep the appearance of multiple lock locations consistent across a bank of cabinets.
The trim ring fits 1-1/8 inch diameter cabinet locks, so it matches a 1-1/8 inch lock hole and frames the lock cylinder at that bore size.
The trim ring is made from brass, so the bezel provides a solid metal surround that supports the visible edge of the lock opening.
The satin chrome finish on the brass trim ring matches satin chrome cabinet locks, so the lock area maintains a uniform satin chrome look on the cabinet face.
The trim bezel is designed to cover chips or gouges in the laminate or wood hole, so it improves the appearance of the overall cabinet lock installation.
The trim ring is listed for use with Olympus series 700, 800, 850, 950, 721, 725, 754, 854, 777, 888, 931, L72, L78, and L92 cabinet locks.
The trim ring serves as a cosmetic bezel around the cylinder, so it surrounds the lock visually without changing the mechanical lock or latch operation.
The Olympus Lock, Inc. trim ring for 1-1/8 inch diameter cabinet lock provides a brass, satin chrome bezel that focuses on the visible cabinet face, so it supports clean, professional-looking lock installations. Its role as a trim bezel in the lock accessories class means it works around the cylinder rather than acting as a locking component, so it targets appearance. With coverage tailored to chips or gouges at the laminate or wood hole and documented use with multiple Olympus cabinet lock series, this ring suits projects where a 1-1/8 inch bore and satin chrome lock finish are already part of the specification.
Sold In: 1 Each