Edgebanding 9073W Grey High Gloss is a 0.5mm thick x 23mm width edge solution from 3B S.p.A that finishes exposed panel edges in a matching grey high gloss look. The 0.5mm thickness creates a slim edge detail that sits close to the panel face, which supports a clean visual line on high gloss furniture and cabinetry. The 23mm width gives coverage for common panel thicknesses used with 3B Surfaces high gloss PET panels, helping installers match the face material across the full edge. The grey high gloss surface aligns with GREY HG PET panel finishes in the same 3B Surfaces category, which simplifies finish coordination on projects using those boards. The material is supplied as a 150LM/ROLL length, identified by manufacturer part 733390734W, so shops can run longer edges with fewer roll changes on repetitive jobs.
The 0.5mm thick x 23mm width format of this GREY HG edgebanding gives fabricators a defined edge size to match with 3B Surfaces high gloss PET panels during layout. The slim 0.5mm profile keeps the edge build small, which supports tight radius and straight-line applications without a bulky lip at the perimeter. With 23mm of width to work with, there is margin for trimming and flush routing while still fully covering panels sized for that edge width. Because it is identified under 3B Surfaces, High Gloss and Matte PET Panels, installers can align this grey high gloss edge treatment with the corresponding PET board program for visually consistent projects.
This Edgebanding 9073W Grey High Gloss is positioned within the Board Panel Products category alongside 3B Surfaces high gloss and matte PET panels, so it fits projects that already rely on that panel system. The GREY HG description ties the edgeband color and sheen to grey high gloss PET faces, which helps when finishing cabinet boxes, doors, or wall panels that share that tone. With a 23mm width, the roll suits panel edges sized to that band dimension, so shops building from 3B Surfaces PET boards can dedicate this material to exposed edges that must visually match. The continuous 150LM/ROLL length supports runs of multiple cabinets or panels in the same grey high gloss program without frequent material changeovers.
The defined 0.5mm thickness on this 3B S.p.A edgebanding sets a predictable profile for trimming and finishing, which helps keep edge reveals uniform across a job. Its 23mm width gives working room for slight panel dimensional variation while still maintaining full edge coverage after trimming. The grey high gloss surface, described as GREY HG, keeps color and sheen consistent with corresponding 3B Surfaces PET panels, which reduces visual shifts from face to edge on completed installations. The manufacturer part number 733390734W lets shops specify the same roll every time, so replacement or repeat production runs match earlier work. Being part of the 3B product class inside Wurth Baer Supply offerings means it sits in the same workflow as other 3B Surfaces components, which simplifies reordering and standardized shop setups.
The edgebanding is 0.5mm thick and 23mm wide, which gives a slim edge profile with enough width for full panel edge coverage and trimming clearance.
The GREY HG description aligns this edgebanding to grey high gloss PET finishes in the 3B Surfaces category, helping faces and edges read as one coordinated surface.
The edgebanding sits in the Board Panel Products category with 3B Surfaces high gloss and matte PET panels, fitting projects built from those PET board systems.
The 150LM/ROLL length provides a continuous run of material, which supports edging multiple panels or cabinets with fewer interruptions during production.
The 0.5mm thickness keeps the edge build minimal, which helps high gloss cabinet and panel faces transition cleanly from surface to edge without a bulky lip.
Manufacturer part 733390734W identifies this specific GREY HG, 0.5mm x 23mm, 150LM/ROLL edgebanding, which supports repeatable ordering for consistent project results.
Choosing this Edgebanding 9073W Grey High Gloss from 3B S.p.A ties your edge treatment directly to the 3B Surfaces high gloss PET panel family. The 0.5mm thickness, 23mm width, and GREY HG finish provide a defined, repeatable match point for panel-based furniture and cabinet work. With a 150LM/ROLL length under part number 733390734W, shops can standardize on a single grey high gloss edge solution across similar jobs.
Sold In: 150 m