Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Edgebanding P8100A Grey Larch defines this 3B S.p.A edge band as a dedicated solution for finishing exposed board panel edges, so cut panels gain a consistent, project-ready perimeter. The 1mm thick profile gives each edge a solid, substantial band, helping panels resist everyday edge wear in regular shop-built installations. The 23mm width matches common panel thickness ranges in cabinetry and furniture work, giving installers coverage to trim flush without chasing a too-narrow strip. The grey larch design aligns with the Grey Larch description in the SAP and web descriptions, supporting visual continuity across all matching panels in the job. A 150LM/ROLL length, identified in the SAP description GRY LARCH, 1MM X 23MM, 150LM/ROLL, provides extended footage from a single roll, which reduces roll changes on longer production runs.
The 1mm thick profile described in the product name and web description gives edgebanding machines and manual trimmers a stable material to mill, which supports consistent trimming along cabinet and furniture edges. The 23mm width, confirmed in both descriptions and the SAP entry, allows installers to hang the band slightly proud on both faces, then bring it flush in a controlled cut without risking panel core exposure along the run. The Grey Larch identification in the web description helps crews quickly pull the correct color from stock, reducing mixups when multiple decors are staged in the shop. The 150LM/ROLL length noted in the SAP description gives enough footage for series work on matching components, which supports repeatable results when running sets of fronts or panels in a single setup.
The product name, Edgebanding P8100A Grey Larch 1mm Thick x 23mm Width, identifies this material as an edge solution for board panel products, placing it naturally in cabinet, closet, and furniture panel workflows. The category reference to 3B Surfaces, High Gloss and Matte PET Panels positions this edgebanding alongside PET-faced panels, so it serves projects built around those surfaces. The Grey Larch color designation across the SAP description and web description aligns it with Grey Larch decor schemes, keeping vertical panels, horizontal tops, and fronts visually consistent at every exposed edge. The 1mm thickness supports these panel applications by giving finished components a defined, furniture-like edge rather than a thin tape appearance. The 23mm width fits typical panel thicknesses used with PET panels, allowing teams to edge sides, shelves, and doors within the same dimension range.
The manufacturer part number 7333P8100A uniquely ties this edgebanding to the Grey Larch, 1MM X 23MM, 150LM/ROLL configuration listed in the SAP description, helping shops reorder the exact same edge material for follow-up jobs or repairs. The 3B product class and 3B S.p.A brand grouping place it within a defined surface system, supporting repeatable material matching across projects that use 3B Surfaces panels. The 150LM/ROLL length helps maintain consistency during runs because operators can process many parts from one continuous roll, reducing seams driven by roll changes. The 1mm thickness, stated in the product and web descriptions, feeds predictably through edgebanding equipment set up for similar gauge material, which shortens setup tweaks from job to job. The 23mm width aligns with the same dimensional callout in every description, so machine fence and trimming settings can remain stable when this exact edgeband is used repeatedly.
Edgebanding P8100A Grey Larch uses a 1mm thick profile, giving the edge a solid band that handles machining and trimming well for typical cabinet and furniture panel work.
The product is specified at 23mm width, offering coverage for common panel thicknesses and leaving enough material for a clean flush-trim on both faces.
The product name and category tie this grey larch edgebanding to board panel products and 3B Surfaces PET panels, fitting cabinet, closet, and furniture panel assemblies.
The SAP description specifies 150LM/ROLL, giving extensive linear meters from one roll so shops can run multiple components or jobs without frequent roll changes.
Manufacturer part 7333P8100A identifies this exact Grey Larch, 1mm thick x 23mm width, 150LM edgebanding, helping buyers match the same material across projects.
The Grey Larch description in both SAP and web data links this edgebanding to Grey Larch panels, supporting consistent decor across visible panel edges.
Edgebanding P8100A Grey Larch 1mm Thick x 23mm Width gives shops a defined edge solution for Grey Larch board panels, tying directly to the 3B Surfaces, High Gloss and Matte PET Panels category. The 1mm thickness, 23mm width, and 150LM/ROLL length documented across the product and SAP descriptions align with typical cabinet and furniture panel runs. Choosing manufacturer part 7333P8100A keeps future orders locked to the same Grey Larch decor and dimensions, supporting consistent results across initial builds and follow-on work.
Sold In: 150 m