Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
StealthLock wall mount plate is a CompX Timberline wall mounting plate designed for the TP-100 or TP-150 Transmitter Pad, so it sets up a dedicated station for the electronic control where users expect to find it every time. The plate is specified as a StealthLock wall mount plate in black finish, which visually matches StealthLock components and keeps the control point looking consistent in finished cabinetry or commercial millwork. Manufactured as model MP-300-WM, this wall mounting plate is part of the StealthLock system family, so it follows the same application intent as other CompX Timberline Lock magnetic and keyless components. The plate is purpose-built for Transmitter Pads TP-100 or TP-150, so installers know it is sized and configured specifically for those controls in normal StealthLock layouts.
The description states that the StealthLock wall mount plate mounts to any flat surface with 2 screws, so installers can fasten it to case sides, partitions, or walls without specialty tools. Because only two screw locations are required, layout goes quickly and there is less risk of misaligned holes when multiple plates are set at a common height. The web description notes that the mounting plate is affixed to a back plate, which sets up a two-part assembly that stays anchored to the surface while the Transmitter Pad portion can be accessed separately. This structure helps keep the fixed mounting points stable even when the pad is repositioned during normal use or service.
The web description calls this product a CompX Timberline wall mounting plate for TP-100 or TP-150 Transmitter Pad, so it is focused on creating a defined location for those two StealthLock controls. By tying the plate directly to the TP-100 or TP-150, installers can standardize the transmitter location across a run of cabinets or fixtures, which simplifies how users operate the locks day to day. The description adds that this plate is used to protect the Transmitter Pad in heavy use applications, so when the pad is operated repeatedly, the supporting structure helps resist twisting or prying loads at the control surface. That protection is especially helpful anywhere users are likely to press or tap the pad frequently, because the forces are carried by the plate and its fixed back plate instead of the pad body alone.
The product description explains that the mounting plate is affixed to a back plate and allows easy removal of Transmitter Pad, which sets up a permanent base with a removable front component. In practice, the affixed back plate keeps the screw-fixed portion in place on the flat surface, so the mounting datum does not shift when the Transmitter Pad is taken off for service or adjustment. Because the plate allows easy removal of the Transmitter Pad, technicians can access the pad without disturbing the main mounting screws, which reduces the chance of loosening the wall connection over time. The same description notes that this wall mounting plate is used to protect the Transmitter Pad in heavy use applications, so the two-part structure supports the pad during frequent actuation while still letting it be detached when work is required. The black mounting plate also keeps the area looking orderly when the transmitter is reinstalled, which matters on exposed cabinetry faces or visible end panels.
The CompX Timberline MP-300-WM wall mounting plate is described for TP-100 or TP-150 Transmitter Pad, so it is targeted at mounting those specific StealthLock controls.
The StealthLock wall mount plate mounts to any flat surface with 2 screws, so it secures to case sides, panels, or walls using a simple two-point fastening pattern.
The product description states it is used to protect the Transmitter Pad in heavy use applications, so the plate supports the control body where it is pressed repeatedly.
The mounting plate is affixed to a back plate and allows easy removal of Transmitter Pad, so the base stays fixed while the pad can be taken off when needed.
The description notes mounting to any flat surface with 2 screws, so installers lay out only two holes and can repeat transmitter locations quickly on multiple openings.
MP-300-WM is the manufacturer part number for the CompX Timberline StealthLock wall mount plate, so it pinpoints this specific wall mounting component in project documentation.
The CompX Timberline MP-300-WM StealthLock wall mount plate is identified as a wall mounting plate for TP-100 or TP-150 Transmitter Pad, so it suits projects built around those StealthLock controls. Because the plate mounts to any flat surface with 2 screws and is affixed to a back plate that allows easy removal of Transmitter Pad, it fits workflows where transmitters must be both secure during daily operation and removable for access. For installations expecting frequent use of the transmitter, this plate is described as used to protect the Transmitter Pad in heavy use applications, making it a straightforward choice whenever a defined, durable transmitter location is part of the project plan.
Sold In: 1 Each
