CompX Timberline Lock StealthLock Wall Mounting Plate, Satin Nickel - MP-700-WM

CompX StealthLock Wall Mount Plate For Transmitter Pads

CompX Timberline wall mounting plate positions a StealthLock TP-100 or TP-150 Transmitter Pad on the wall so the keypad stays in a consistent spot, which helps users quickly reach the lock control without hunting for the transmitter each time. The MP-700-WM mounting plate is designed specifically for the TP-100 and TP-150 Transmitter Pads, so the fit between the pad and plate is tailored, helping the pad sit square and stable on the surface. This wall mounting plate is part of the StealthLock magnetic and keyless lock system family, so it supports installations that rely on a hidden lock body controlled from a separate keypad-style transmitter. The wall-mounted transmitter layout lets installers position the control pad where it is easy to access during everyday cabinet or furniture use.

Mounting Plate Details That Support Daily Use

• This CompX Timberline wall mounting plate is designed for TP-100 or TP-150 Transmitter Pads, so the installer can dedicate a fixed location for operating the StealthLock system and keep the transmitter aligned to the users workflow.
• The wall mounting plate is used to protect the Transmitter Pad in heavy use applications, so the pad housing is buffered by the plate during frequent operation, which helps maintain a neat appearance around the lock control point.
• The unit mounts to any flat surface with 2 screws, so it can be positioned on a wall, cabinet end, or similar flat area where users naturally reach, allowing a straightforward layout around existing casework.
• The mounting plate is affixed to a back plate and allows easy removal of the Transmitter Pad, so the installer can pull the pad off the front plate when service, battery work, or reconfiguration is needed, without disturbing the primary mounting points.
• The satin nickel mounting plate provides a finished face around the TP-100 or TP-150 Transmitter Pad, so the control area ties into typical decorative hardware finishes often used on cabinetry and architectural millwork.

Wall Mount Installation And Surface Positioning

This StealthLock wall mounting plate mounts to any flat surface with 2 screws, which lets the installer place the TP-100 or TP-150 Transmitter Pad on drywall, cabinet panels, or other planar substrates using standard drilling and fastening habits. The back plate carries the primary fastening load, while the satin nickel mounting plate becomes the visible face, so alignment work can focus on the back plate position and then the front plate can be set neatly. With the Transmitter Pad removable from the mounting plate, adjustment or pad replacement can be handled from the front side, which is useful where rear access to the mounting location is unavailable in built-in cabinetry or finished walls.

Using The MP-700-WM In StealthLock Layouts

Where This StealthLock Wall Plate Is Used

The MP-700-WM wall mounting plate is used with StealthLock TP-100 or TP-150 Transmitter Pads, so it becomes the interface between the keypad-type control and the surrounding wall or cabinet surface in a keyless locking layout. By mounting to any flat surface, the plate supports installations on finished walls, cabinet ends, or panels near the locked compartments controlled by the StealthLock system. The satin nickel mounting plate presents a clean border around the Transmitter Pad, which helps the control station visually match other decorative elements in woodworking and architectural environments. In heavy use applications, the mounting plate helps protect the Transmitter Pad by placing a stable, dedicated frame around it, which supports repeated pressing and contact during normal lock operation.

Why This Mount Plate Design Supports Repeatable Results

The wall mounting plate being affixed to a back plate provides a two-part design where the back plate holds the 2 screw fasteners and the satin nickel mounting plate presents the finished face, so installers can achieve consistent alignment by first setting a stable base. Because the mounting plate allows easy removal of the Transmitter Pad, service work such as replacing a pad or addressing the electronics can take place without disturbing the screw-mounted back plate, which keeps the original layout intact over time. Using a dedicated wall-mounting plate for TP-100 or TP-150 Transmitter Pads standardizes the control location for StealthLock systems across a project, which helps users build the habit of reaching to the same point whenever they operate the keyless lock. In heavy use applications, that consistent framing and support around the transmitter helps the pad stay seated and reduces movement at the interface between the pad and wall.

Common Questions About The MP-700-WM Wall Plate

Selecting The MP-700-WM For StealthLock Installs

The CompX Timberline wall mounting plate MP-700-WM is tailored for TP-100 and TP-150 Transmitter Pads, so it gives StealthLock projects a defined, durable control point on any flat surface. The satin nickel mounting plate and back plate combination supports straightforward two-screw installation while allowing front-side pad removal later. For StealthLock layouts that rely on a stable wall-mounted transmitter in heavy use applications, this wall mounting plate provides a dedicated interface between the transmitter and the surrounding wall or cabinet surface.