Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Domi Snap-On mounting plates from Salice America are hinge mounting plates designed to work with Salice hinges in cabinet installations. The plates provide a 12mm height, so hinge positioning stays consistent across the run of cabinets where this height is required. As hinge mounting plates, they act as the fixed reference between cabinet side and hinge arm, which supports repeatable door alignment from cabinet to cabinet.
These hinge mounting plates use a two cam adjustment design, which provides cam height adjustment of plus or minus 2 mm and cam depth adjustment of -0.5 mm to +2.8 mm. That adjustment range allows fine tuning of door position after installation, using the cams instead of moving the cabinet drilling pattern. The mounting plates are for series 100, 200, 400, F, M, universal hinges, and Silentia plus hinges from Salice, so one plate type can serve many hinge options in the same project.
The hinge mounting plates are constructed of stamped steel or die-cast steel with nickel plating to resist corrosion. This construction and finish keep the plates structurally sound and help maintain appearance in typical cabinet environments. The cabinet side fastening method uses pre-mounted Euro screws, which match common system drilling patterns so plates can be driven directly into prepared Euro screw holes.
Salice hinge mounting plates in this BARGRC9/20 configuration are designed as Domi Snap-On plates, so they are matched to Salice hinge arms that use the same snap-on interface. The 12mm height corresponds to a specific mounting level relative to the cabinet side, which matters when hinges and plates are specified together for overlay and gap planning. Because the cabinet side fastening method uses pre-mounted Euro screws, the plates match Euro screw drilling in the cabinet side panel, which supports accurate and quick location during installation.
The two cam adjustment system built into these plates provides cam height adjustment of plus or minus 2 mm and cam depth adjustment of -0.5 mm to +2.8 mm. With that range, installers can adjust the mounted door position vertically and in depth after the plate and hinge are fixed to the cabinet and door. This approach keeps the cabinet drilling pattern unchanged while still allowing precise alignment of multiple doors along a run.
These hinge mounting plates belong to the hinge mounting plates product class and fall under the hinges and hinge base plates category, so they are specified for cabinet door hinge mounting rather than general hardware. They are identified by manufacturer part number BARGRC9/20 and are compatible with Salice series 100, 200, 400, F, M, universal hinges, and Silentia plus hinges. That compatibility allows the same 12mm plate style to be used across several Salice hinge series on a project, which helps maintain consistent geometry and simplifies hinge selection for different door conditions while keeping the same base plate reference on the cabinet.
The cabinet side fastening method relies on pre-mounted Euro screws, so these plates are applied to cabinet sides that use Euro screw drilling. In a shop or on site, this means the user can align the plate over the Euro screw holes in the cabinet side, then drive the Euro screws to secure the plate. With nickel plating specified to resist corrosion and steel or die-cast steel construction, the plates are suited to common cabinet environments where hinges and plates are concealed but still exposed to everyday humidity and handling.
The two cam adjustment on these hinge mounting plates supports accurate door alignment by supplying a defined cam height adjustment of plus or minus 2 mm. In practice, this lets the installer nudge doors up or down along a cabinet bank without shifting the entire plate or changing the drilling pattern. The same system provides cam depth adjustment of -0.5 mm to +2.8 mm, which gives control over how far the door sits toward or away from the cabinet face. That depth control matters when aligning overlays, creating even reveals, or matching adjacent cabinetry where small differences in door position can be noticeable.
The 12mm height specified for these mounting plates sets the hinge arm pivot at a known distance from the cabinet side, forming part of the geometry that determines overlay and door swing. When all plates in a run share this 12mm height, doors hung with compatible Salice hinges share the same reference plane, which helps maintain uniform gaps and motion. Construction in stamped steel or die-cast steel, backed by a lifetime warranty, supports long-term use of these adjustment features, since the plate body and cams are built to stay stable while being set during initial installation and any later adjustments.
The BARGRC9/20 hinge plate is a hinge mounting plate in the hinges and hinge base plates category, used to connect Salice hinges to the cabinet side in door installations.
These hinge mounting plates are for series 100, 200, 400, F, M, universal hinges, and Silentia plus hinges, so they cover many Salice hinge options on a cabinet project.
The two cam adjustment provides cam height adjustment of plus or minus 2 mm and cam depth adjustment of -0.5 mm to +2.8 mm, allowing fine tuning of door position after mounting.
The cabinet side fastening method uses pre-mounted Euro screws, so the plates fasten into Euro screw holes on the cabinet side panel for repeatable positioning.
The 12mm height establishes a defined mounting level for the hinge arm, which supports consistent overlay and alignment across multiple cabinet doors using the same system.
These hinge mounting plates are constructed of stamped steel or die-cast steel with nickel plating to resist corrosion, supporting long-term performance in typical cabinet environments.
The Domi Snap-On mounting plates BARGRC9/20 from Salice America combine a defined 12mm height with two cam adjustment in both height and depth, so they support precise cabinet door alignment when paired with compatible Salice hinges. With cabinet side fastening through pre-mounted Euro screws, stamped or die-cast steel construction, and nickel plating specified to resist corrosion, these hinge mounting plates fit well into professional cabinet production or serious DIY builds that rely on Euro system drilling and adjustable hinges. Choose this hinge mounting plate when a 12mm Salice mounting plane and post-installation cam adjustment are part of the hinge layout.
Sold In: 1 Each