Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
1/4 FNPT high flow coupler from Milton Industries is a V style air line fitting designed to move more air in demanding setups. The 1/4 inch female national pipe thread connection ties this coupler directly into air lines or manifolds that use FNPT standards, which helps keep shop plumbing consistent across tools and drops. The coupler body is built around a 1/4 inch basic flow size that supports higher air volume than many general-purpose fittings, so tools see steadier supply during continuous use. With a maximum inlet pressure of 300 pounds per square inch, this coupler works in typical compressed air systems that run at higher shop pressures without being the limiting component. A maximum temperature rating of 250 degrees Fahrenheit means the coupler handles normal compressed air temperatures without affecting function.
The sleeve release on this Milton Industries V style coupler is a push type, so engaging a plug into the fitting is a simple push motion that speeds tool changes at the hose end or manifold. To remove a plug, the user pulls the sleeve back, which cleanly releases the connection without extra levers or complex motions around the work area. Because the coupler accepts A, M, and V style plugs, existing hoses and tools equipped with those plug styles can connect using the same push-and-pull workflow, which helps keep changeover steps consistent. Using V style plugs with this V style coupler retains maximum air flow, which matters when higher volume tools need full capacity from the air line.
This Milton Industries 1/4 inch FNPT female V style high flow coupler is suited for high volume, low pressure applications where air demand stays elevated over longer runs. The 1/4 inch female national pipe thread inlet connects to standard threaded ports on drops, manifolds, or hoses that terminate in male NPT fittings, which aligns with common shop layouts. Because the coupler accepts A, M, and V style plugs, it can serve mixed fleets of air tools and hoses using those interface styles, which keeps systems flexible without changing every plug at once. The 1/4 inch basic flow size paired with 74 standard cubic feet per minute airflow capacity means the coupler can sit at key connection points in lines feeding tools that rely on higher flow to perform.
The 1/4 inch basic flow size of this V style high flow coupler works with the 74 SCFM airflow rating to maintain stronger air delivery where volume demand is higher, which helps tools see less dropoff during continuous operation. The maximum inlet pressure rating of 300 PSI means the coupler can operate on systems that are regulated from higher tank pressures, so it will not restrict working pressures typical for air tools. With a maximum temperature rating of 250 degrees Fahrenheit, the coupler is engineered to handle the thermal conditions found in compressed air circuits, which supports stable performance over time. Using V style plugs with this V style coupler retains maximum air flow, which benefits tools that rely on higher volume within high volume, low pressure applications.
The 1/4 FNPT high flow coupler is suited to high volume, low pressure applications, so it fits air systems where tools draw substantial airflow at moderate working pressures.
The Milton Industries V style coupler accepts A, M, and V style plugs, allowing connection to those three plug types in a single fitting location.
The V style high flow coupler uses a push type sleeve release, so plugs engage with a push and disconnect with a sleeve pull, streamlining frequent tool or hose changes.
The 1/4 inch basic flow size on this coupler supports 74 standard cubic feet per minute, which provides substantial airflow for high volume, low pressure applications.
The Milton 764 high flow coupler has a maximum inlet pressure of 300 PSI and a maximum temperature rating of 250 degrees Fahrenheit for typical compressed air conditions.
The 1/4 inch FNPT female V style high flow coupler uses 1/4 inch female national pipe threads, matching many standard air line and manifold ports.
The 1/4 FNPT high flow coupler from Milton Industries combines a V style design, 74 SCFM capacity, and 300 PSI maximum inlet pressure to support demanding high volume, low pressure applications. Its 1/4 inch female national pipe thread connection integrates with many existing air line ports, while compatibility with A, M, and V style plugs keeps tool and hose connections flexible across the system. For air lines that must deliver consistent volume through a compact fitting, this Milton 764 high flow coupler offers a focused combination of flow capacity and standard threading. Put it to work where steady airflow and quick push sleeve operation support the way you run compressed air tools.
Sold In: 1 Each