T587 LED 4.75W Neutral Linear Light Kit, 19", Satin Nickel

T587 LED Neutral Linear Light Kit For Cabinets

T587 LED 4.75W Neutral Linear Light Kit gives a 19 inch satin nickel fixture sized for 21 inch face frame wall cabinets, so the light is proportioned to standard cabinet widths for clean, even illumination across the cabinet bottom. This cabinet sized LED linear light is rated at 4.75 watts, which provides focused task lighting while staying efficient for longer runs in a kitchen or shop layout. The 3500K neutral color temperature produces balanced light that avoids a harsh blue cast or overly warm tone, which helps colors on doors, counters, and contents read accurately during everyday use. Lumens per foot are rated at 150, giving a predictable light level you can factor into layout planning and spacing along a run of wall cabinets. Beam spread is listed at 120 degrees, helping the fixture wash the work surface and minimize bright hot spots directly under the bar.

Key LED Linear Light Details For Cabinet Pros

• This Tresco Lighting linear fixture is described as cabinet sized LED linear lights for 21 inch to 96 inch face frame wall cabinets, so the labeled size on the kit directly matches the wall cabinet width it is designed to fit.
• The product description notes that the package is labeled with the cabinet size the fixture is designed to fit, which helps installers quickly match lights to plan drawings and cabinet schedules without remeasuring each opening.
• Maximum continuous run is specified as 16 feet, or 192 inches, allowing multiple fixtures to be planned in sequence while staying within the stated limit for powered runs along a row of upper cabinets.
• The light is described as dimmable by using low voltage dimmer switches and LED wall dimmer switches, so output can be tuned to suit task lighting at the counter or softer ambient lighting along the wall.
• Bulb life is rated at 50,000 hours, giving a long service window that reduces the frequency of fixture replacement in built-in cabinet installations where access is more involved.
• The fixture is made of aluminum and the description notes aluminum acts as a heat sink to extend the life of the LEDs, which supports thermal management when fixtures are mounted under enclosed cabinet bottoms.

Surface Mounted LED Linear Light Installation Use

The T587 LED 4.75W Neutral Linear Light Kit is described as a surface mounted kit, which means the bar mounts directly to the cabinet underside rather than into a routed channel, simplifying installation on finished cabinets. The 19 inch fixture length is aligned with 21 inch face frame cabinet sizing, so installers can center the light under the box while maintaining clearance from styles and hinges. Aluminum construction helps the bar sit rigid and straight against the cabinet surface, aiding straight-line alignment across multiple boxes. The stated maximum continuous run of 16 feet means installers can link fixtures within that overall length and keep performance consistent along the connected section. The satin nickel finish on the light body gives a neutral, professional appearance under face frame cabinets where the bar may be partially visible from seated positions.

LED Cabinet Lighting Use And System Planning

Where This 19 Inch LED Linear Light Fits

The SAP description notes this 4.75W, 19 inch linear LED is for 21 inch face frame cabinets, so it targets common wall cabinet widths used in both kitchens and other storage runs. The broader web description references cabinet sized LED linear lights for 21 inch to 96 inch face frame wall cabinets, indicating this specific 19 inch model is one size in a coordinated range for typical wall cabinet widths. Because the maximum continuous run is listed as 16 feet, multiple cabinet sized fixtures can be laid out along that run while staying inside the stated limit, which is useful when lighting several wall cabinets in a straight section. The 150 lumens per foot rating gives a predictable light output across the 19 inch bar, allowing planners to approximate overall delivered lumens by adding fixtures across a wall. Beam spread at 120 degrees means the light projects broadly from the underside of the cabinet, which helps coverage reach both toward the wall and toward the front edge of the counter or work surface.

Details That Support Repeatable LED Install Results

The product description states the kit is labeled with the cabinet size the fixture is designed to fit, which supports repeatable layout on site because installers can match each labeled light to cabinet widths without translating fixture lengths in the field. Dimmable operation using low voltage dimmer switches and LED wall dimmer switches allows the same fixtures to serve as bright task lighting or reduced-level accent lighting, supporting consistent control schemes across multiple rooms using Tresco Lighting components. Aluminum construction, noted as acting as a heat sink to extend LED life, helps maintain performance over the stated 50,000 hour bulb life rating, which is significant once fixtures are installed and trim is complete around them. The description notes that required component is a power supply, tying the fixture into a low voltage system layout where transformer sizing and run lengths can be planned together. It also states that optional associated items such as linkable cords, dimmer switches, and an on/off switch are available and sold separately, allowing the lighting layout to be scaled or controlled with related Tresco Lighting system parts.

Common Questions About T587 Cabinet LED Linear Light

Select This LED Linear Kit For Cabinet Runs

The T587 LED 4.75W Neutral Linear Light Kit combines a 19 inch satin nickel bar, 4.75 watt load, and 3500K neutral output sized for 21 inch face frame wall cabinets, which aligns fixture length with common cabinet widths. With a 150 lumens per foot rating, 120 degree beam spread, and a maximum continuous run of 16 feet, the light supports predictable layout and performance across multi-cabinet installations. Aluminum construction acting as a heat sink and the stated 50,000 hour bulb life contribute to long-term service in built-in applications. For cabinet runs using Tresco Lighting systems, this model and its required power supply can be planned together for consistent, neutral undercabinet illumination.