T600 LED 5.5W Neutral Linear Light Kit, 22", Satin Nickel

T600 LED 5.5W Neutral Linear Light Kit Use

T600 LED 5.5W Neutral Linear Light Kit, 22", Satin Nickel is a cabinet sized LED linear light designed for face frame wall blind corner cabinets, so it puts light exactly where wall blind corner storage is hardest to see and work. The web description states it is for cabinet sizes from 24"W to 48"W, which matches common blind corner wall layouts and helps align this fixture with standard upper cabinet runs. The SAP description notes 5.5W and 22" LED at 3500K, giving a neutral color that matches typical task lighting and reduces color shift across a kitchen or shop wall. Being part of Tresco Lighting LED Linear Lighting means it fits into a consistent low voltage lighting approach across a project. Satin nickel finish on the light works with typical cabinet hardware finishes and keeps the fixture visually clean when mounted.

Cabinet LED Linear Lighting Details That Matter

• The web description calls this a cabinet sized LED linear light for 24"W to 48"W face frame wall blind corner cabinets, so installers can match the labeled cabinet size to predictable blind corner layouts for repeatable placement along the cabinet interior.
• Maximum continuous run of 16 feet (192") allows multiple fixtures on a single run, helping lay out long wall sections while staying within the rated limit for consistent light levels along connected cabinets.
• Dimmable by using low voltage dimmer switches and LED wall dimmer switches, so lighting levels can be adjusted to suit task work or accent use along the blind corner wall area without swapping fixtures.
• Bulb life rated at 50,000 hours reduces the frequency of fixture replacement, which is important when the light is mounted deep in a wall blind corner cabinet where access is more involved.
• Beam spread of 120 degrees widens the light pattern across shelves and into the blind corner area, cutting dark spots inside the cabinet and supporting full visibility across stored items.
• Lumens per foot rating of 150 gives practical brightness for task or interior cabinet lighting, matching project layouts where predictable light output per linear foot is needed.

Surface Mounted LED Linear Kit Installation Use

The description identifies this product as a surface mounted kit, so it mounts directly to the cabinet surface without recessing, which speeds installation in existing wall blind corner cabinets. The product uses 3" input and 3" output cords attached to the aluminum LED linear light, giving short leads at each end that help with linking to extension cords or routing around cabinet framing. Two 72" extension cords in the kit provide extra reach from the fixture to the power supply location, allowing more flexibility in locating low voltage components away from the immediate working area. The cabinet sized labeling on the product is aligned to the cabinet size the fixture is designed to fit, which simplifies selecting the correct length for a given wall blind corner cabinet without field cutting the light.

LED Linear Lighting Role In Corner Cabinet Runs

Where This T600 LED Linear Light Fits

The web description specifies cabinet sized LED linear lights for 24"W to 48"W face frame wall blind corner cabinets, so this fixture is aimed directly at wall blind corner cabinet runs in kitchens or similar installations. The SAP description states it is for a 24" wall blind corner, meaning its 22" length is proportioned for that cabinet size, leaving room at each end for mounting around face frame or side clearances. The label that matches the cabinet size the fixture is designed to fit helps installers align the 22" light along interior rails or under-shelf edges where a 24" wide wall blind corner cabinet typically needs coverage. Being an LED linear light in the Tresco Lighting line means it can be used wherever that cabinet type appears along a run, tying into existing Tresco low voltage layouts.

Details Supporting Consistent Light And Layout

The aluminum construction listed in the description acts as a heat sink to extend the life of the LEDs, which supports the 50,000 hour bulb life rating and keeps performance stable during long operating periods in enclosed cabinet spaces. A maximum continuous run of 16 feet (192") lets multiple 22" fixtures be linked along a run within the rated limit, giving even light over a line of cabinets without overloading the system. Lumens per foot of 150, combined with a 120 degree beam spread, translates into an even wash of light across shelves and into blind corners, reducing the need for additional point sources to handle dark zones. The note that Tresco fixtures are designed to operate only with genuine Tresco transformers, power cables, and connecting cables means this light is part of a matched Tresco system that is engineered to work together. The requirement for a power supply directs the planner to size and position the power component in the overall low voltage layout before final mounting.

Common Questions About This Tresco LED Cabinet Light

Choose This Light For Wall Blind Corner Cabinets

This Tresco Lighting T600 LED 5.5W Neutral Linear Light Kit, 22" is described as a cabinet sized LED linear light for 24"W to 48"W face frame wall blind corner cabinets, aligning the fixture length with common wall blind corner layouts. With 5.5W power, 3500K neutral color temperature, 150 lumens per foot, and a 120 degree beam spread, it supports bright, even coverage inside these hard-to-light cabinets. The aluminum housing acting as a heat sink, 50,000 hour bulb life, dimming capability, and 16 foot maximum continuous run help fit this light into professional low voltage cabinet lighting plans that need longevity and control.