4398/50 Grommet, Polished Chrome 2-3/16" Dia., Zamak

50mm Bore Hole Grommet For Clean Cable Runs

50mm bore hole grommet from Schwinn Hardware is a small zamak cable grommet designed to finish and protect a 50mm cable pass-through, so cable openings in desks or work surfaces stay neat and professionally edged. The polished chrome finish presents a bright, finished look around the hole, which helps workstations, media centers, or shop benches match other chrome hardware and trim. The zamak construction forms a rigid ring around the bore, so the edge of the hole remains stable in day-to-day use. This small cable grommet format suits tighter layouts where a standard large pass-through would be visually heavy. Available for a 50mm hole, it ties directly to common boring patterns, keeping layout work predictable across multiple panels or repeated jobs.

Key Details That Support Cable Management

• The small zamak cable grommet body creates a solid surround at the hole edge, so cables pass through a defined opening that helps reduce wear at the panel and keeps the bore from looking rough after machining.
• The rubber, star-cut cable grip spans the center opening, so cables seat through flexible cuts that help hold them in place and reduce movement when equipment is repositioned on the work surface.
• The polished chrome finish on the visible ring presents a clean metallic edge, so the bored hole reads as a finished design feature that aligns with polished chrome hardware elsewhere in the room or installation.
• The design for a 50mm hole ties directly to standard metric boring, so fabricators can drill using familiar sizes and repeat the same layout across multiple tops or panels without changing tooling.
• The Schwinn Hardware branding signals a purpose-built grommet for cable routing, so it can be specified with confidence alongside other Schwinn components in desks, multimedia units, or workspace builds.

50mm Grommet Fit For Bored Panel Holes

This Schwinn polished chrome cable grommet is specified for a 50mm hole, so installers bore a single, known diameter and then press the zamak body into the opening for a clean edge. The zamak construction provides a firm outer shell that seats against the bored wall, so the grommet stays aligned in normal use of the work surface. The small format keeps the visible trim ring compact, so it can sit close to other components on crowded panels. Because the grommet is part of the Multimedia and Workspace Components category, it is suited to routing device leads through desks, counters, or cabinets where organized cable passage is required.

Using This Schwinn Cable Grommet On Projects

Where The 50mm Bore Hole Grommet Fits Best

This small zamak cable grommet with rubber, star-cut cable grip works wherever a 50mm hole passes cables through a panel. In desks and multimedia furniture, the 50mm bore hole grommet creates an orderly outlet for monitor, power, and signal leads without leaving raw machining visible around the opening. On shop benches or workstation tops, the zamak ring defines a fixed pass-through point, so cords can route through the same location every time the surface is used. In closet or garage organization layouts that use powered accessories, the polished chrome trim frames the cable exit neatly against finished wood or laminated panels. Because it is part of Schwinn Hardware multimedia and workspace components, the grommet fits naturally into projects that blend storage, work surfaces, and cable routing.

Details That Support Consistent Cable Openings

The zamak construction of this Schwinn cable grommet forms a rigid shell around the 50mm opening, so each bore hole keeps the same internal diameter and visual profile across a run of identical parts. The rubber, star-cut cable grip in the center opening flexes around individual cables, so the pass-through can handle different cable counts while still presenting a controlled, centered exit point. The polished chrome finish around the outer rim reflects adjacent surfaces, so the edge of the hole blends with other polished chrome trim pieces in cabinetry, desks, or workspace builds. Because the grommet is designed specifically for a 50mm hole, drilling patterns can be standardized, which supports efficient production of repeated tops, panels, or media units using the same boring setup.

Common Questions About This Schwinn Cable Grommet

Selecting This 50mm Grommet For Your Project

The Schwinn Hardware 4398/50 grommet, with zamak body and rubber, star-cut cable grip, turns a plain 50mm hole into a defined cable pass-through. The polished chrome finish supports jobs where visible hardware matters as much as function. For desks, multimedia units, or workspace components that route cables through panels, this 50mm bore hole grommet provides a consistent, finished opening ready to drop into standard boring patterns. Add it to your next cable-management layout when a small, polished cable pass-through is needed around a 50mm hole.